Printable View
Ive got a ste of AU Falcon thermo fans and was wondering if anyone has fitted them to their Patrol and what type of modifications are needed to fit them.
i sat mine behind the radiator before i took the motor out and it looked like it was going to hit the water pump.
Any help is greatfull
Jamie
Sorry haven't fitted AU Falcon thermo fans, but have installed Davies Craig thermo fans ( twin ) 2 my patrol, here is a link 2 my pics
http://www.nissanpatrol.com.au/forum...hermo-Fan-Pics
My word of advice is to make sure you have a pretty good shroud around you fans as just having the fans themselves you may find your patrol overheating pretty easily.
Ther's no link, Todd..Quote:
Originally Posted by toddrhind
Why do you need electric fans that flow less air flow than a factory clutch fan ???
Heating issues ???
OR
Something else ???
im taking the viscous fan of, which will reduce drag on the motor and the twin AU thermos are going to be set at two different temps. i want to have more control over the temp of the cooling system, ive had my old GQ running too hot at first, i put a new radiator in and a diesel viscous fan and it ran too cold. i do alot of trips to the snow and i dont want it running cold. the AU fans have a good shroud and great airflow, the are used by a fair few of the boys i race against, and they are rear mounted aswell as front mounted
just to add the front mounted ones have a seperate tube frame from the firewall forward and modified to suit it
Thanks Kat, added 2 original postQuote:
Originally Posted by katwoman
If your thermostat is working properly it shouldn't run cold.Quote:
Originally Posted by High_Mod_Performance
Setting up the AU fans as 2 speed is how they were set up in AU's. Run in series at low speed (so each fan saw 6 volts) and parallel for high speed.
Tony
Jamie, PM XLR8, if you want some help / advice on AU Falcon thermo fans.....he runs twin AU/BA Falcon fans with a custom made shroud and thermostatic switch on his.
Cheers
Todd
Photo's of the custom fan shroud please XLR8.Quote:
Originally Posted by toddrhind
Tony
Tony, pics of his fan shroud can be found here http://www.nissanpatrol.com.au/forum...-electric-fansQuote:
Originally Posted by YNOT
Cheers Todd
I know someone who has installed AU fans in his 4WD and he had lots of problems with blown fuses. On investigation - the fans drew over 30 amps each. He rewired the fans individually (so if one fails the other will still work) with 6mm wire and installed 2 X 50 amp circuit breakers and they are fine now.
electric thermos are much better if you are going to do some decent water crossings. If youve ever seen somebody do one with a clutch fan that wont disengage it looks like a fountain has sprung out from under the bonnet and torque will suffer severly. Electric thermos can be switched for this reason. Clutch fans tend to be more reliable if water crossings are not goin to be a problem though.