Bloody hell, would be a shame for that high compression to be ruined by his old turbo. Ticking time bomb really!
I'd be slapping a new Borgwarner on that asap Rossco to prevent some serious damage mate!
Printable View
Bloody hell, would be a shame for that high compression to be ruined by his old turbo. Ticking time bomb really!
I'd be slapping a new Borgwarner on that asap Rossco to prevent some serious damage mate!
Yep cheers heaps AB & MB☺ . . . Actually did better than I expected to be honest quite happy . Thinking might do a trip or two in April then time to pull the thing apart and strap on a borg warner get the old girl to wake up a bit i think. . .
Sent from my SM-T800 using Tapatalk
Removed the rooftop tent and put a door in the cargo barrier so the mossie awning would go on the shelf I made for it .
Attachment 71224Attachment 71225
Put a new OME steering dampener on. Didn't realize how sloppy it as before. Don't know if it was the original but was stamped Nissan and had little compression.
Its leftovers from the cargo barrier , or 25x3mm flat , bracket is about 100mm long on top and 90 degree bend bit was just long enough to fit the light bracket , even the existing hole in bracket was in the right spot .
I need to replace the roof screw with a bolt ,so two bolts on top of bracket holding it to roof rack and I have put one roof screw on the bend so it holds tight and won't shake off , pics below of bracket .
Attachment 71226Attachment 71227
You can type in lightbar or bull bar brackets that should find the correct size bracket for you
http://www.ebay.com.au/itm/251885300...%3AMEBIDX%3AIT
You can even find some that will mount sideways
I welded tabs onto my roof rack
This style will suit vertical mount where as the others would suit a horizontal mount.
http://www.ebay.com.au/itm/Pair-2-Bu...cAAOSwhOVXdyp2