Nipped up the wheel bearings and while I was there converted the auto hubs.
Replaced the thermostat with a genuine Nissan one.
Attachment 60560
The old one didn't want to close.
Printable View
Nipped up the wheel bearings and while I was there converted the auto hubs.
Replaced the thermostat with a genuine Nissan one.
Attachment 60560
The old one didn't want to close.
Finally fitted new intercooler Attachment 60564
Finally fitted new intercooler
Is that one of those ASE coolers?
Started to strip downthe TB48 calipers i scored. The pistons are a bit stuck in so a good over night soaking should free them up. Not only are they bigger than the current ZD/ TB / TD calipers by 10 mm on the disc diameter, the pistons are larger too. I am keen to see what the Troll will stop like after fitting them. I need to get the larger bore i.d master cylinder first too.
Sent from my SM-P600 using Tapatalk
New set of platinum plugs and tappet adjustment.
got it dirty