Hope they find it soon!
Attachment 85972
Printable View
Hope they find it soon!
Attachment 85972
Attachment 85973
You’re not alone.
Ok OK OK!!!!!!!
Normality Returns!!!
I am At Peace gents!!!
Hitting the Panard lower nut with the rattle gun put enough vibration for the GQ to Spit the thing back out at me!!! I have no idea from where but it landed on the floor beside me!!!
Thanks to all for your compassion and understanding except that bloke @Winnie
http://www.nissanpatrol.com.au/forum...2022/09/64.jpg
Sent from my SM-G977B using Tapatalk
I bought this TOPTUL mini bit ratchet set (GADW2701) from Audel tools in Dandenong South, that I've had my eye on for a while.
Good timing as the guy in store said he has been meaning to update the price from $59 to $89!
Still listed on their website at $59 ;)
It'll be good for some screws or fixings that need a bit more leverage as you can set up a T piece or right angle handle using the extension.http://www.nissanpatrol.com.au/forum...2023/04/72.jpghttp://www.nissanpatrol.com.au/forum...2023/04/73.jpg
I laughed when I read this, as I found a 10mm spanner, a small screw driver and about a dozen nuts and washers in the valley under the manifold when I stripped everything down recently. I am yet to find a 13mm socket though, maybe this is the next generation universal upgrade to the 10mm?????
You can't blame working on the GQ for loosing the 13mm. I bet there isn't a single 13mm nut on the Patrol as Japanese folks are very superstitious and have something against that number. When I replaced the GU engine, all medium sized bolts and nuts were either 12mm or 14mm, which made it quite handy having only two sockets on the pocket.
;)
Or maybe bolts you replaced. Sometimes you go to to the HW store with a japanese car bolt as a sample, and for the size and thread pitch you want, the head size is different.