1 Attachment(s)
Disconnecting GU "key in" warning buzzer
1. Remove steering column shroud
- 3 screws
- remove key surround
- with a small screwdriver, gently force the two shroud sections apart.
Insert the screwdriver where the 2 stalks enter the shroud. Only the bottom section of shroud has to be removed fully.
2. On top of the key cylinder 2 wires exit with black tube wrap, going to a white plug - for 4.2 models. For 3.0 models the plug is brown. This plugs into a white socket which is wrapped in foam around the black wiring loom. JUST UNPLUG IT!
3. Replace the shroud
4. Enjoy the silence
Tony
P.S. I copied this from another forum