Printable View
Hi all.
This weekend i plan on fitting the 3" lift to my car. Just wondering if i will be needing to compress the springs or ill be able to get enough clearance to put them in? I will have access to a hoist for the job :D hopefully that will make it a little nicer than rolling around on the ground. Also any other nasty suprises i'm in for?
Cheers
On a hoist you should be able to get springs in by just unbolting shocks , sway bar links and brake line t junction at diffs
Beautiful! Just what i wanted to hear liftlid. Hopefully i still have some skin left on my knuckles afterwards.
Word of advice.
Don't do it under a carport or garage, which you won't be able to get out of, once the vehicle is lifted / standing taller.
Yes, it has happened.
If that happens just deflate the tyres, roll out, reinflate, drive away and find a new parking spot ;)Quote:
Originally Posted by Hodge
They say a silly question is better than a silly mistake so here it is. With the stabilizer bar release assembly still fitted what would i do with the link arms for the sway bar, do i need to ditch it for extended links?
cheers
Most likely with a 3"lift??Quote:
Originally Posted by Bigbird91
Dang it, that's what i was thinking would be the out come. I might have a look to see if i can mod it to work.
Boarder 4x4 fab in boarder town, sa do a extended release unit. Unsure of cost thou
Cheers Westy I'll give them a buzz.