Voltage drop is dependant on 2 things. The resistance of the circuit and the current you are drawing. If the 10 amp startup has a 1 volt drop, then the 1 amp load will only have 0.1 volt drop
Sent...
Voltage drop is dependant on 2 things. The resistance of the circuit and the current you are drawing. If the 10 amp startup has a 1 volt drop, then the 1 amp load will only have 0.1 volt drop
Sent...
TVP???? If you you have to use an acronym because the name has more than 2 syllables then I ain't eatin' it.
Sent from my SM-T355Y using Tapatalk
What about the inside out.....rod through block
Sent from my SM-T355Y using Tapatalk
Oil to combustion chamber, worn scraper rings, worn cylinder bore, worn valve guides
Sent from my SM-T355Y using Tapatalk
Moving timing mark indicates problem with advance mechanism. Either mechanical advance (sticking or broken spring), or vacuum advance (leaking vacuum line, hole in diaphragm or sticking linkage) ...
Good luck.
I had a Cabstar with a BD30 engine that had a leaking top cover on the injector pump. Luckily I had the nissan workshop manual so I read through it.
I will and have repaired nearly...
I would still suspect the auto choke as that would effect both petrol and LPG.
Sent from my SM-T355Y using Tapatalk
Does it have an auto choke? That could be your issue.
Sent from my SM-T355Y using Tapatalk
"rubbing alcohol"
Sent from my SM-T355Y using Tapatalk
You put the phone too close to your head and it detected an apple user.
Sent from my SM-T355Y using Tapatalk
I love the Notes. Had a 2 then upgraded to the 4. Not sure if I will upgrade when the next one finally comes out, I like the replaceable battery.
Love the stylus, so handy for doing quick notes and...
When it's bogged it's doing zero kms 😆
Sent from my SM-T355Y using Tapatalk
First is for conection direct to cylinder, second could be for a manifold setup.
I wouldn't touch either of them as I don't think the pressure ratings are high enough for the cylinders in...
With all their comms nowdays they most probably had all the vehicle details before the helmets came off. Just checked your details matched the vehicle.
Either that or he has a patrol and wanted a...
I think it's really more about what is ahead of you than behind. Something to look forward to, a change of routine, bugger the diet get something special for lunch.
"THIS IS ABOUT ME".
Sent from...
I used to get a shit night sleep and wake up with sore ribs. Changed bed and now sleep in seperate room to wife. Both of us now get a good sleep.
Apparently my snoring would wake the wife followed...
Very deep.. My morning routine includes feeding and chatting to the magpies, currawongs, butcher birds and kookas on the back deck while I have my coffee and smoke.
Sent from my SM-T355Y using...
I suppose no different to breaking a steering pump belt.
You can even save on gym fees with the upper body workout.
Sent from my SM-T355Y using Tapatalk
CV could do it but I think that would still be noticible when jacked up. What hubs do you have? Need to rotate the CVs, so on a bit of flat ground select 4wd and just move a couple of metres back and...
I would check your steering knuckles and bushes. It only happens when you have weight on them.
Sent from my SM-T355Y using Tapatalk
Just after they were legalized and I got my car license. Fun times.
Sent from my SM-T355Y using Tapatalk
Look mum....there's a toy otter in the water.
Sent from my SM-T355Y using Tapatalk
Look mum.... it's a toy otter
Sent from my SM-T355Y using Tapatalk
How do you know there is no oil. From the dipstick? Could be just below the end of the dipstick, but still may have been enough for the oil pump to pick up.
Maybe the mechanics did an oil and filter...
The compressed air helps to expel the weld metal and keep the gun and surrounding metal cool.
Sent from my SM-T355Y using Tapatalk