cheap tarp to lie on, and hand cleaner for after, workshop manual.
The patience to wait for someone to come along who actually knows that the bit you have been wrestling with needs judicious...
cheap tarp to lie on, and hand cleaner for after, workshop manual.
The patience to wait for someone to come along who actually knows that the bit you have been wrestling with needs judicious...
top and bottom rad hoses, plus some heater hose some rad stop leak,liquid metal, and also I take 5l of engine oil just in case I do manage to crack a sump or something im able to partially refill my...
In that case a extra spare, or a good plug kit as a minimum. Something to demount and remount a tyre could be real handy.
I have a bead breaker, its done 34000klm in 3 trips to the interior and...
Here it is...
I was trying to find this thread for you, has a lot of info on what some of the members carry...
...
You will need a 22mm spanner and socket (or 2 spanners) for control arm and panhard rod nuts and bolts, 24mm for radius arm bolts
both electrical and 100mph tape
assorted cable ties
The kit AB...
What size spanner does it go up to AB? A tomahawk in a case and a hammer will always be handy. And don't forget a lever bar of some type(jack handle, long socket ext bar etc) for tension alternator...
Hi mate, to start off (I'm sure there will be other people to add stuff here) but you can't go wrong with a crescent kit from Bunnings.
Very cheap but good quality and packs up small.
There...
Llordan Diesel,
7 Arwon Crt
Lonsdale.
PH. 81864711.
Have used then a few times and seem good and honest! Been around along time.