Turns out it was the 10amp fuse that’s under the bonnet in the back plastic box. Wish I had of checked that sooner but glad it’s all working now!
Sent from my iPhone using Tapatalk
Turns out it was the 10amp fuse that’s under the bonnet in the back plastic box. Wish I had of checked that sooner but glad it’s all working now!
Sent from my iPhone using Tapatalk
Shoulda said at least I have a working handbrake
Sent from my iPhone using Tapatalk
Has anybody done this?
Looking at getting 6 x 285/75/16s and leaning towards the bf ko2s.
Was quoted $385 each from bob Jane, so $2310 in total. Had a look online and turns out super cheap sell...
Thanks fellas
MB, it came with a single fan underneath to help with slow speeds/heat soak. The initial reason I purchased it was to aid with the heat soak as when I’m towing the boat she really...
Just providing a bit of feedback and after advise since changing the radiator presser bottle in my 06 4.2tdi patrol
First of all the factory one was buggered so I ordered a replacement. Decided to...
That’s basically the same as mine. Although I am looking at upgrading the air filter box and tossing up between a ufi 16 or 18g. Looking forward to see how yours goes!
Sent from my iPhone using...
Cheers Hodge that’s exactly what I was installing.
Only thing with the HPD kit is that it only comes with one blanking plate. Iv got it all removed now and have blocked it on the exhaust end (the...
Thanks for the tip Avo, got the dog!
http://www.nissanpatrol.com.au/forums/images/imported/2021/06/106.jpg
Sent from my iPhone using Tapatalk
I had to replace mine last year and went with this one
https://www.baxters.com.au/alternator-hitachi-type-e-coated-12v-130amp-suits-nissan-patrol-turbo.html
Pretty sure it’s exactly the same...
So it was about $490 with a three year warranty, which I thought was a pretty reasonable price! The smaller 100amp are about $400odd.
The reviews I’d read where pretty good so kinda worked out...
Thanks Cuppa, forgot to update my profile, I’m unfortunately back in Melbourne now for the time being.
I was struggling to find a genuine Nissan one and being my daily iv settled on this one for...
Even at $600 that’s not too bad for a unit that personally has done 300000ks and is 15 years and basically requires bugger all maintenance. I’d be pretty stoked too if the new one lasts that long!...
Yeah that’s what the bloke at Nissan in Bundoora quoted me over the phone. I nearly fell over when he said the price. I might try a different dealer and see what price they come up with. If it’s only...
I run all makita battery gear for work, love it, so many different tools in the makita battery range. Am looking at getting a battery rattle gun to make wheel rotating quicker and easier. There’s a...
Cleaning out my trailer, most have it has been in there for a few years and is a bit dirty and dusty but still ok.
Pick up only from Greensborough in Vic. If not gone by Tuesday night will be going...
Ordered mine today! Just got to find an antenna now! Any recommendations? Was thinking a 4.5 dbi.
Sent from my iPhone using Tapatalk
A mate sent me this one today
http://www.nissanpatrol.com.au/forums/images/imported/2020/02/67.jpg
Sent from my iPhone using Tapatalk
Thanks for the replies so far.
The reason i was thinking falcon was because iv always had them before the patrol. Au was the best model, dads has 450000 and still going. Easy enough to gets parts...
What was the Sherpa worth? I got the tjm 12000 pound fitted the other day, they did a pretty neat job, haven’t had a chance to use it yet. Comes with both the wired controller and wireless. Only...
Thanks MB, sounds good!!
Sent from my iPhone using Tapatalk
Yeah I get that it’s a fair wack higher in price then a lot of the others but I just can’t understand how some of the cheaper ones would have the reliability of say a tjm or warn. Anyway, time will...
Purchased the winch today! Original price was $1500 supply only but I got it for $1500 including fitting plus a bash plate supplied and fitted so no complaints here!
Sent from my iPhone using...
Changed the rad with the adrad. It was sitting on around 90* at 100k p/h with temps about 45 outside. If I pushed it any harder to say 110, temps got to around 108*.
Iv fitted a 3inch exhaust...
I wouldn’t use patrolapart unless his got plenty of $$$ to burn. Have heard they do a terrific job but there a better options out there imo
Sent from my iPhone using Tapatalk
He got it for $7500 with reg. Just doing a bit of search now, I think his done well!
Sent from my iPhone using Tapatalk