http://www.nissanpatrol.com.au/forums/images/imported/2016/09/158.jpg
http://www.nissanpatrol.com.au/forums/images/imported/2016/09/158.jpg
I didn't remove the glass. I just took my time at welding it up so it wouldn't get too hot. I did make a very strong brace for the inside of the door skin.
Nearly finished, just about to apply the...
No not really, just take the IC off, a couple vacuum hoses and 3 12mm bolts that hold the throttle body onto the inlet manifold, I recommend replacing the gasket between the manifold and throttle...
whens the last time you removed and cleaned the throttle body? could be gummed up with gunk
I know from experience that this is caused by the fuel shut off solenoid valve sticking..
But unsure if this would be the same with the 3ltrs