Hi All,
Found this tablet mount at Bunnings on clearance for $2.00
Made a bracket out of 50mm x 5mm flat bar. 240mm long. shaped at the ends around the mirror and mount to look nice.
It is...
Hi All,
Found this tablet mount at Bunnings on clearance for $2.00
Made a bracket out of 50mm x 5mm flat bar. 240mm long. shaped at the ends around the mirror and mount to look nice.
It is...
Hey Hodge,
The boost is now set at 15psi.
I am onsite now but the problem happens straight after start up as you go to drive out of the carpark, it doesn't matter about the rev range, the...
Hi All ,
So I adjusted the boost down , it now runs at around 15psi , it spiked to around 17psi between gear changes and runs
10-12 psi at 100 km.
Looking at it now I think it may have been...
yeah I just rewired the whole lot with larger wire and the correct fuses, it was a mess under the flash looking conduit wrap, it looked like the apprentice tried wiring it Monday morning after a...
78609
here is the 30A fuse in the headlight circuit ??
Hi All ,
Update , I have had no issues at all with the screw mod in the boost controller over the last few weeks , it’s set at around 20 psi with the needle valve at 1/4 turn , gauge shows to...
Hi Mudski , I changed the throttle body on the engine
Hi All,
I bought and fitted the 3 setting blue tooth model last week , I have it set in “sport” mode and the difference is very noticeable , all throttle pedal lag is gone and the power gain is...
Hi All
Made a mod to my spring and ball boost controller that may be usefull to those with spring / ball jamming or sticking issues.
I removed the ball altogether and replaced it with a...