this is your lift pump. sorry i thought it was glass topped but its not
this is your lift pump. sorry i thought it was glass topped but its not
yes but there should be another breather off the top of the tank. there should be an inspection plate in the rear of your vehicle if its a shorty then under the rear seats there should be a plate...
When you say your hand primer pump leaks, are you saying it leaks a bit of fuel out when you pump the primer? Sounds like that could be your issue as I'm guessing it would also work in reverse and...
Yeah not wrong there,
Is this called a plague of Ferrets LOL
Maybe you could grab a couple of inline clip on filters and bypass the original filter, then bleed it at the pump, you might get some at a servo.
SD33s are not high pressure.
Cheers, the ferret.
Mine did the same thing and ended up being auto hub locker. Removed it and all ok. But cv could still be the cause.
X 2 a damaged CV joint
Only when turning could mean a worn or damaged cv joint.
I assume your talking about the front hub lock nut?? Hmm not sure mate, I dod know the free wheeling hub of the M series does not bolt on to a GQ or GU. That Nut may well be the same thread though??
I bought my swivel hub rebuilt kit from patrolapart for $185. It's actually a pretty simple process to change everything.
When you pull each component out, lay it on a piece of board in the same...
Just get a quote first. It would not be a cheap exercise thats for sure. I would be thinking somewhere around the $1k mark
You will require Grease and Rags and about 10 hours
I use toilet paper - roll per side
Took me around 4 hours per side - including a beer or 2
yep - you will need grease and a few tools.
Buy the combined king and wheel bearing kit, it's cheaper!
If I remember the snake racing shackles are designed to prevent inversion
Other option is to get the spings reset - done this on a 85 hilux years ago. -I dont know if broklen springs still do...
You have more then 1 seal leaking.
The axle seal behind the cv - must be leaking to let diff oil into the cv. -
The grease seal in front of the cv
And the rear wheel bearing grease seal.
...
X 2 cant go past Obsession for Patrol Mods
Call Brett from 4x4 Obsession mate, he is in Melton and a Great bloke to deal with.
03 9746 8699
http://4x4obsession.com.au/
other side of town where you are in Cranbourne . Everything 4x4 . I went past there came out with tons of information . they got all the gear and workshop.
definitely will be going back there to...
TJM in coburg are good to deal with , also ARB in t-town .
Give Snake Racing a buzz they do 2" extended.
remember if you only do rear you lift 1" if you do
front and rear you get 2" lift all around. Very well built BTW
I fitted them on the rear of my...
I dont know the bj73 shackles.
You can get ones made for the mk / mq patrol - look for some that are designed to prevent spring inversion.
X 2 with MT why not give the entire front end a birthday with new bearings, seals and fluids
I think its the bearing kit but not 100% I'm sure someone will confirm however if funds permit.. Couldn't Hirt to do the swivel hub while your at it and replace diff oil at the same time while its...
Hey Ferret,
Not sure about SD33's but if you have to change the exhaust manifold, make sure you spend a couple of days before hand spraying the manfold studs and nuts with a bit of WD40 or...