G'day and welcome to the forum mate. Enjoy your stay!
G'day and welcome to the forum mate. Enjoy your stay!
G'day and welcome to the forum mate. Enjoy your stay!
I don't think it really matters if you do it hot or cold mate, others may have differeing opinions. The other thing that can release an airlock is a bleed screw. Not too sure which motor you have, I...
I received my package when I got home yesterday arvo! I have to say I am very impressed with the goodies! Thanks Andy! I've got the vest on as we speak!
Oh, and Doggy, if you want a look at the...
G'day and welcome to the forum mate. Enjoy your stay!
G'day and welcome to the forum mate. Enjoy your stay!
You're a deadset legend Andy. Thanks a bunch mate. And good luck to you and the family for tomorrow mate. I'm sure plenty of people on the forum will be sending good vibes your way and thinking of...
That's the weep hole in the water pump which is there to let you know when the pump has seen better days as far as I know. Hopefully someone else will be along with some more info.
Nice, congrats mate!
x2..go the mighty Q!
Although, I had to rebuild my blown up 2.8...But she's still going!
After the headache I had mate, and the symptoms you are describing, I'd almost bet my lefty that it's the same problem. Regardless, hope you can sort it out without too much drama. If you have any...
Hey mate, sounds like the exact same problem I had for a while, I checked everything that has been mentioned above and still no joy. After swag loads of trial and error I ended up having to pull the...
G'day Phil, welcome to the forum mate. Enjoy your stay!
Considering that it is only vapour coming from the rocker casing at the top of the motor (that's where the PCV is located) I can't see why it would smell burnt unless the oil was really dirty and...
There are a couple of ARB stores over here, one in Canning Vale, and one in Osbourne Park.(Ithink) The other option would be Makin Tracks in Midland, they are an OME stockist and ARB distributor. I'm...
G'day all, not sure if this is the right place to post or not, (if it isn't, Mods please move)
Anyway, just thought I'd let y'all know that if you are looking at doing the NADS or simply fitting a...
I've got 8 for the time being. It's been a while since I had any ink done, so there will be more time in the chair very soon.
Sweet, I'm pleased he looked after you! I'll have to pop in and stir him up.
Nice thread. Great pics, I rebuilt my 2.8 not long back and removed the head exactly the same way! Great job, please the old girl is back on the road!
Welcome to the forum mate. Enjoy your stay!
Absolutely. And my question is, why isn't it in the Olympics? :)
http://www.andtshirtprinting.com/
These guys do all my band Merch AB, the service is good and they are competitivley priced in the market (we did the research) They have pricing listed on their...
Welcome to the forum Tim. Enjoy your stay!
http://www.nissanpatrol.com.au/forums/showthread.php?11818-GQ-parts-available-in-Perth
You could try this guy? Not too sure what he has got mate.
No probs at all mate. It's always a pleasure to be able to impart some info. Pleased you got the job done without too many dramas! Here's hoping you get many more hours and km's of happy wheeling!