Hi All,
So this has played on my mind for a while and after doing some digging I can't really find any answers. Like most CRD owners I have blocked my EGR between the cooler and the valve on the...
Hi All,
So this has played on my mind for a while and after doing some digging I can't really find any answers. Like most CRD owners I have blocked my EGR between the cooler and the valve on the...
Wish I had of seen this a couple of weeks ago, paid $160 for two from a wreckers and they are just as bad as my originals!!
Sand, mud and the misses down in Bremer Bay!
Bogged up at Wedge in WA
Would totally be a goer if I didn't have to look after to dog but I suppose that's the whole point really isn't it.
Yeah could be, it was replaced not to long ago. Have flicked the pics off to my mechanic to see what he says, might have to take it back to them and get them to sort it I suppose.
I really wanted to put a set of Toyo AT2's on my Trol when I changed over to steel rims but Toyo ran a huge promo on them and I was waiting for ages so settled with Coopers ST-Maxx. Have always ran...
Big ass breaker bar is what I used on mine with a bit of brute force and ignorance!
New fire place I installed earlier this year.
http://i251.photobucket.com/albums/gg289/Beni_C/20140511_120232.jpg
Arrived in the mail yesterday so hooked him up to my battery box last night and have it running the Engel behind the bar atm. Works a treat! Will change the cycle on to 4 deg instead of 5 deg I...
Thanks TD, dead keen to crank this mod out!!
I run Coopers myself but dont plan on doing this with them!
Clever idea from the advertising boffins at BFG though!
...
End result.
The mechanic at Robson basically said not to waste my money on them checking the big end as they haven’t heard of one failing yet and they had a surprising number of GU's in there so I...
The 3 first things I did to 08 CRD when I bought it, Scanguage, Provent 200 Catch Can and EGR block. It chucks the check engine light up every now and then but the CRD seems to control boost better...
So dropped into Robsons last night to discuss with the boys what was going to happen next. Craig the service manager said that the idler pully was knackered which I was already aware of and advised...
I grabbed some off fleabay mate, $300 for a full set including the 3rd row. 10oz cotton canvas.
Sure they aint Blackducks or MSA's but for the price with a 5 year warrenty I figured you cant go...
Thanks fellas.
So went down to the mechanic last night, ever the slightest knock coming from the big end, I had trouble hearing it so hopefully we are onto it early and only the bearing needs to...
Been a while since I have posted any progress on the Big Gold Bus so here a few new piccies of where she is at now!
http://i251.photobucket.com/albums/gg289/Beni_C/DSCF1790.jpg
This photo was...
The aux battery I have is huge!! The biggest battery tray I can get is 325mm long and the 130a/h AGM battery I have is about 340mm long. Down the track I will eventually hook it up all under the...
Will PM ya Mudski
After doing a small inspection last night I have discoved that 2 of the fuel line clamps even though they are tight are not sealing the two lines that come out of the top of the fuel filter and head...
Would if I could mate.
Best piece of advice, its only worth what someone is willing to pay for it.
Thats an optical illusion Clunk, I double checked, that was caused by the camera flash. The rims are dead the same, one just an inch smaller than the other.
Double checked against my old boys D40...
Ok had the winch bar and snorkel fitted today - BEHOLD!!
http://i251.photobucket.com/albums/gg289/Beni_C/TrollB4.jpg
Before
http://i251.photobucket.com/albums/gg289/Beni_C/TrollNow.jpg
After
Touring and towing first and foremost rusty, plan on getting a nice off road camper to go with it, but I still want it to be able to handle the rougher stuff. Wont be going down the whole crawler...