super cheap auto has a brand called ridge ryder, another option for you, i dont know what they are like though
super cheap auto has a brand called ridge ryder, another option for you, i dont know what they are like though
number 2 is the FPRV and number 4 is the banjo bolt
id be thinking glow plug relay (near the drivers right knee abour the fuse box)
or fuel pressure relief valve it might not be close allowing to build pressure, how does it start if you have it...
Hi see images
82099
82100
i did mine just by crawling under it nothing had to be removed
i was putting a new sensor in to i cut the wires and put a socket on it cause i wrecked it with a spanner
the socket i used was a...
options id think of are
*wreckers (could be rare as its not found in the base models)
*genuine new - probably not available anymore
*replace screen with the lower model glove box and wire the...
Bit more info, is it a common rail zd30 or Di?
10w40 is what i use never heard of 5w30 in a crd. i know heaps that run 15w40 no problems either
like i said i run the castrol magnatec 10w40 usually you can get 5litres 40-50% off at super cheap...
mudski is spot on use genuine and only after market for a short time. alot of things on the patrol love to be only genuine such as tentioner, belt, fuel filter. ive tried non gen and always end up...
i work in a nissan dealer workshop and its a rookie mistake to replace a sensor just based on a fault code, sometime the sensor is reading the correct this and something else is at fault.
in your...
my guess would be the front timing cover, ive seen many zd30 crd leak from the main timing cover sandwich plate.
79084
79085
79086
so in the workshop manual there alot of info
if you can get to it it might help.
go to em and look for zd engine
or give me your email and i can email you the pdf of just that section
see the...
north vic engines
Address: 24 Schubert St, Cobram VIC 3644
Hours:
Open ⋅ Closes 5PM
Phone: (03) 5868 2253
they do exchange engines
http://www.nissanpatrol.com.au/forums/showthread.php?8424-What-did-you-do-to-your-Patrol-today!&p=767969&highlight=fuse#post767969
cheack out my post in the link above. go down and see the pics a...
as an update to this and a final close to it all i havent had any issues now that i moved the transponder in the flip key closer to the end of the key.
So doesn’t the extra boost alone lower egt’s? And more boost would make it feel more mowerful.
I’ve heard that with a larger exhaust fitted you can get higher boost spikes? Boost gauge and Dawes valve will sort it I know but have you noticed any spikes
Ok so there might be something like this about but I thought I’d share what happened to me.
So I set out to test if my common rail relief valve was holding rail pressure, refer the the image
Start...
I have these covers they fit nice I recommend them
brother inlaw had a engine swap on his patrol and no power afterwards and that turned out to be a vacum hose not connected to the turbo boost solenoid.
so the turbo actuator wasn't working, easy...
on a right hand drive car look in the lefts side of the passenger foot well
Sounds like your on a good track now, the kick panel is in the left hand side of the left hand front foot well.
You’ll have the pull up the scuff trim and then pull out the kick trim, there’s a...
76918
clicl the little icon that i put an arrow to. then a small pop up window appears then choose file on your computer and click upload
if you do need a reverse signal for the head unit these is a yellow wire in the left hand kick panel that i used to trigger the head unit.
im sure is was a solid yellow wire just use a test light...