Search:

Awesome write up mate. Interesting that they can re tune your chip for the hpd gear. Is the mob that fitted and dynotuned you rig in Melbourne?

I'm hoping to use 3" all they way to the turbo from the top of the air cleaner box using 3" stainless fittings
Somehow I'll incorperate the OE MAF housing into the 3" piping,
that cobra head is...

That'll set you apart from the rest.
That is cool, sky's the limit with what you could do.
Double thumbs up.

Nice build up/Solid feedback... got my hpd gear on order.. will be doing pretty much same mods as u..

mate ive read so much doom and gloom about these 3l motors, we have one a 2002 gu limited edition
had it 3yrs now and still going strong 260 xxx plus at present weve done the simpson qld meet up act...

I didnt fit indicators in the body lights just reverse and stop/brake.
I think you EGTs are a tad high still, on the HWY flat road my EGTS are 260-300c
will reach 425c pushed up hill, Do you have a...

looking good . surprised by the EGT comment like you.
What are your EGTs at 100 if yours is an Auto,
IMO it will be different to a manual as revs are higher in a manual
Do you think the maf...

it comes from us mate all the new park fees are suppose to go towards all this
user pays

you hit the nail on the head mate

Go into my user profile mate. I put a link in there to a write up on the how too's on these plates. Well on the plate that fitted mine.

you should have captive nuts on left side same as right under hook
you will need to make the holes a tad bigger unless john has already fixed that problem

Wow, what a bargain.
Sounds like you'll use it and enjoy it more than the previous owner.
Good find.

Thats the old style Dawes you have too, without the new heavy spring, I believe. Have you changed the spring? Now going by the vids, without sound on, your not getting boost, even when you floor it....

I used to sell Castrol a few moons ago now. I still keep in contact with the rep who's been there for donky's. RX Super is not recommended for the ZD30's but the rep was confident that I could use...

I run Penrite 5-40 semi syn for diesels, combined with a dose of T2
every now and then I have no problems at all very happy

Patrol A Part have them. thats where i got mine from and if you can wire a trailer plug up these are as easy. Took me about an hour all up and probably spent 45 mins of that chinwaggin with the bloke...

What is the rear tail light mod? If you just want to make them work, move it up your list because its an inexpensive and easy mod.

If its the SB12 or SB200 the wire can be used for an internal LED, Bypass switch, or both. The wiring is the same for both units, I'll be wiring this up myself in a couple of weeks with a LED next...

I'd be putting it back on mate. Its there for a reason and a good one too. You just need to hold your tongue right as they are a bit tricky to put fit.

Mind you at that time of night some ppl might no be capable of casting a line LOL

Are you crazy Scott most ppl move to FNQ not away from there.
Might want to PM AB about becoming a Vendor on this Forum there are strict rules in place

Iil get the boss to do your face ache page well done scott

@ Mego if your are after a custom rod give SG1 a pm.
He may even repair your favourite rod not sure
but anything fishing rod related he would be your go to man

Noticed someone fitted 04 mags and tail lights,
Gotta love the white GU I say

Hey thanks for the write up SG1 - where'd you source the gauges from and how much they set you back if you don't me asking?

Cheers