Search:

Thanks Kelvinator.

Just not sure what to believe.
Still doesn't feel right to me, something is definitely different since having wheel bearings and swivel hubs done...

See how things go and...

the easiest way to posting a pic is, just next to where you post a comment click the "go advanced" button/
scroll down till you see the "mannage attatchments" button.
on the pop up select "add...

Punch "gu patrol braided brake lines" into ebay search and you will get a few options.

I had mine (body to diff only) custom made from a local Brisbane guy, worked out dearer than off the shelf...

I have a full set of snake racing braided brake lines DOT rated. If your going to do it then you really want the full set including all 4 wheel and the 2 main lines down to the diffs. This is also a...

I just changed you over mate, as above you didnt confirm your email on sign up which throws you in a category that messes up the 25 post rule...All good mate, you should be good to go now.

I'll get Andy on to it, just looked at your account and you never verified your email addy when you first joined

Cheers

Toddie

Can you see the actuator actually holding on?

You can just remove it and bump your idle up to around 800 to compensate.

I will do some testing on the weekend but have never had an issue on the pc other than having 2 wait a few secs for the link 2 be click-able .

OEM only for the GU's healy. They are a moulded type of channel. Not like the Q's where anything fits. But having said that, the drivers door window on my GU would rattle when down about half way. I...

Check this out


http://www.clarkrubber.com.au/bailey-channel-seals.html

If you're running it up the inside on the "A" pillar Jaycar sell
sticky backed Square pads that except a small cable tie.
Would make the job neat too. come in black or white.

Woohoo! Celebratory carton:-).
Just make sure the breather line material is compatible with oil

FanTapstic!

Yep I agree, those kits are totally over priced.


FanTapstic!

If you want to buy a set you can get them on eBay around $60 they do look neater than a home made job

I just used these , mainly the rear as front on GU already done,

I think he says he is doing it for a test......

tappn it

I've even had brand new tierod ends faulty.
ebay items, had to throw all 4 in bin and replace.
Local bullseye supplied at similar price, and problems solved.
Iv'e notice alot of stuff on sus-bay...

Thank you for that helpful post, did you happen to take any photos?.

I have no doubt that many people will find this helpful.

Unfortunately sealing up the starter motor will not stop the water...

It's more then likely a problem with mud stuck around the brushes or between the armature and poles in the starter motor then a problem with the solenoid.

You can pull the starter motor off, strip...

Make sure the battery terminals are clean and tight, also check the main earth connection to the engine and starter motor.

After you have tried to start it, feel the battery cables and terminals....

Maybe you could try shorting the starter motor?

Lucas

TB42 or TD42?
If it is the starter motor, an overhaul would be cheaper than buying a new one.
Sorry I can't be of more help
Lucas

G/day keep us up to date have farm in QLD but live in NSW thanks

Why were you driving across the road to walk the dog ?

cheers

Replacement hinges & new bailey channel is the way to go...... Its a bit of work but will last for years so its worth it IMO.....