Search:

When i did monza seats i used a 10 mm thick plate the one in the center of the pic below to level them out.
http://i567.photobucket.com/albums/ss117/it250k/patrol061.jpg

If anything like mine the...

The plate i used to level out the seat was 10mm thick other then that no but if you look and compare bolt holes etc it will give you a rough idea and make it a bit easier..

If your recovering a monza seat i would recommend trimming down the side supports as they get crushed real quick getting in and out.
I made some brackets and took pics it will give you an idea...

gy and sb green yellow sky blue go to the speedo

well anyone using the l.e.d lpg gauge will know how useless they are.
Years ago when i had a petrol gq i wired mine up to the one in the cluster.
It worked great and didn't jump all over the place...

Have you adjusted the waste gate on the turbo that's what controls your boost..
And just wind the fuel screw in some more .
Basically more fuel more power then more boost will help it burn and ...

New exhausts stink for a while as well especially if they have painted them on the joins etc.
Might pay to check the bungs in the floor as well.

I decided to dig an old handheld kenwood tk370g out of the draw today and reprogramme it with the new 80 channels.
If anyone on here has a kenwood or tait radio i have cables and software to...

Might be the horn their is a small brass type bit that is spring loaded that pushes against a ring on the back of the steering wheel.

I tried the ct-18 today works great even with the garden hose .
I bought some ct-14 as well to try on oily greasy stuff.
and one of these pump up spray bottles...

Keep posting lol if you need help dribbling more posts growlers will guide you though it he is an expert.

I have one here and i need a head for it as well but i decided whilst the head is off i might as well put new big ends and rings in it.
Heres a few things that will help the rd28 survive egr block...

Heres a link if anyone is interested.
http://www.chemtech.net.au/wn_chemtech1l.html
Or at supercheap...

The prices are all over the place i remember selling similar shorty petrols for $2500-3500 .

It's funny you ask today of all days lol my starter crapped itself no doubt due to the water inside it .
I had a spare one here that was a reduction starter i put in starts first touch of the key....

I have used that $2 can stuff and it worked ok for mud it was a 3 in 1 degreaser .

It would be more likely oil from the breather where it returns to the inlet piping it starts leaking at the front of the turbo because it is a low point and the seal isn't that great.
a common fix...

#B2F5 PEARL WHITE
#B326 WHITE
#B3G9 RED /SILVER(#624/#549)
#B4G4 BLACK /GRAY(#BG8/#KG3)
#B4G6 PURPLE /GRAY(#LG0/#KG3)
#B4G7 BLUE /GRAY(#TG0/#KG3)
#B4G9 SILVER /GRAY(#549/#KG3)
#B526 RED
#B532...

Heres a handy link for nissan paint codes.
http://www.antrx.com/smf/index.php?topic=18668.0
Yours would be kh2 Gray and kh3 black

Marriage ?
If anyone on here should be getting married it is kristoffa and taslucas

What fantasy world are you living in ? she would spend her life broken down waiting for a tow truck and whinging to holden about what a t#rd they sold her.

Buy a holden for the missus then she will have no spare time to nag you lol

This will give you an idea of whats involved.

http://www.youtube.com/watch?v=gQSGtD3A0h0
Also download the manual from this site you'll be right to go

Just type (rd28 head) into ebay

http://www.ebay.com.au/itm/Nissan-RD28-Brand-New-BARE-cylinder-head-patrol-/170735856727?pt=AU_Car_Parts_Accessories&hash=item27c0a66c57

And try your local...

Thought i might as well start a diy thread on the spartan locker install.
I decided to buy a spartan locker from...