Maybe something like this: http://www.ebay.com.au/itm/FORKLIFT-MAIN-SERVICE-VALVE-3-8-male-outlet-to-LPG-SERVICE-TAP-1110964-/272312144796
Just a simple shutoff valve. you would have one on the...
Maybe something like this: http://www.ebay.com.au/itm/FORKLIFT-MAIN-SERVICE-VALVE-3-8-male-outlet-to-LPG-SERVICE-TAP-1110964-/272312144796
Just a simple shutoff valve. you would have one on the...
As far as I know, yes. http://www.uneek4x4.com.au/cap-locker-rear-diff-lock-nissan-gu-y61-patrol-1997-2015/
correction: release date is March
Here's an awesome review! Apologies in advance;)
https://www.youtube.com/watch?v=St2mrMBbiAM
MB, I'm not sure what coils the installer put in. Just gave him a list of the gear I have, he talked to Dobinsons who supplied the coils. The front was easy...steel bar and winch, so height went up...
Well standard is 555mm for front and 560mm back for a GU1 to 3. Mine (2" lift) is 610 up front and 620 back. But mine's a new lift (6 months old).
That's some seriously good information there, Jay see! Why don't you give the engine flush a go? What you're trying to do, is dissolve the buildup of varnish on the steel LSD clutch plates. Just...
Anyway, here's the link..it's post #16 http://www.patrol4x4.com/forum/nissan-patrol-gu-gr-10/patrol-lsd-replcement-clutch-kits-17715/
Naa..not yet. Just some info I picked up on that other forum. I'm not sure if it's okay to provide a link?
I've just been doing a bit of reading about Patrol lsd. Re..lsd clutch pack shudder. Here's what you do. drain out 500ml~ of oil from your rear diff, add some Nulon engine cleaner (or different...
Yeah, I've met the guy who runs these trips (have a look at his Youtube channel)...he's a trainer in the Sydney District 4x4 club. That Defender he drives has a "few" mods, like 37" tyres, portal...
My old wheel nuts fit my steelies.
It's a pretty common size, tyres don't hang out the guards. And ADR (?) rules say you can change the track legally (self certify) by 25mm over what is available for that model. Some Patrols come with...
I read somewhere some having problems with the LRA tank and the tailshaft hitting on full flex. Though this may only be a problem on higher lifts. I had a Brown Davis fitted. It's 75L. I'd have to...
I have one of these. I mostly use it to protect against wind/rain.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=65821&stc=1
I have the steel flat rack. great for the price! The mesh platform is on the thin side. But the rest is pretty solid. I've had it 3 months and no rust so far.
I like the idea of a ladder, as it can be a pain getting up on the roof. But how would one of these go if you have a rear wheel carrier? Probably wouldn't fit due to the lack of clearance. Are there...
Looking at their website, they have an 80L subtank (no body lift). There is also a 90L version which needs a body lift....
I got an email from ARB today saying they will be dropping the regular list price on their locker range by $100.