Search:

VL191 form this form must be filled out by a installer approved by the government.
In WA there are additional rules as well.
Regulations gone stupid. Also the Immobilizer must be a government...

The old one had burnt wiring , fried, been like that for a while before i brought it. It was caused when the lpg was put in about 12yrs ago. The wiring loom was squarshed then finally melted burnt...

I'm going on about engine immobilizers. Also push button engine start. Not central locking.
Sorry to confuse you.

Hi just spent the best part of 3 days replacing the loom in my gq .

Now i got to find where the engine immobilizer goes or what the old one looks like. I do have one that i removedbut cannot find...

Diff Ratio Information - Marks 4WD Adaptors
https://www.marks4wd.com/diff-ratio-information
This link shows all diff ratios for patrols and toyota.

Thanks dom,
i have downloaded the gq manual but there's nothing about efi.

HI All.... I almost got this old Patrol Idling nicely thanks to all of the input from all of you. I removed both, aac valve and ficd and cleand them up But with the one with the spring in it and it...

been to nissan and got a picture of the vacum system for the 4.2efi. I have added the picture to this post6939769397 the part number thats circled is what is missing from my poor gq.

HI,
I just found it, on utube. Mass air flow sensor,. Also found how to clean it .... Off to auto one and get a can of cleaner for MAF.
Thanks Drewstar.

HI All,
My mission is complete.
While the I had the time, as I had to wait a day for my gasget to arrive, I reset the tappets. The info in the manual said set them to a cold setting I...

If You are worried about extra heat from the extractors then get some heat wrap for the exhaust system. you only need to wrap the extractors only. It also helps in getting the exhaust from the engine...

Hi Mate, extending the temp wire will make no differance to the reading at your gauge. you said that you moved the sensor to a differant place on the engine. you need to put the sensor in its correct...

put the sensor in the correct place and extend the wire to reach. You may need to install a genuine thermostate or at least the correct temperature range. To cold means more fuel will be used. As the...

Thank you all for your great input. This problem solved.
:cheers: