As you can see Dman, lots of different opinions. If you use the heavy gauge cable from the front of your vehicle to the back of the vehicle then you will be able to add more things in the future...
As you can see Dman, lots of different opinions. If you use the heavy gauge cable from the front of your vehicle to the back of the vehicle then you will be able to add more things in the future...
horses for courses Dman
I run 10mm cable to my Anderson for my Van
(I dont know B&S cables.........- apart from Bachelor & Spinster, and I'm guessing thats not them)
I run an 8mm cable to a fuse...
The sizes of the cable/wire I used was all purchased at a Jaycar store.
The Main feed wire from the aux battery to the fuse box was Jaycar Cat No WH-3060 (rated at 56amps)
I also used 15amp to the sockets. Other wire sizes I used can be found here:
http://www.nissanpatrol.com.au/forums/showthread.php?24529-My-Dual-Battery-Install
:cheers:
I run 15amp cable from my aux battery to the rear for my fridge. Never had any issues.
Overkill would be an understatement for a 40 litre fridge.
You'll get different answers because there are different 'ideal' scenarios.
If you want a power source at the Hitch for Trailers,...
Thats gold. Stirrer!
Is this for when you take your lovely wife camping? [emoji12]
Damn I'm good, Dman look what has arrived bud
http://www.nissanpatrol.com.au/forums/images/imported/2015/09/248.jpg
Hi, Just go around to joining. I've been 4WDing for a number of years and a member of a 4WD Club for as many years . Started with a Hilux but got feed up with accessing stuff in the canopy and...
put the house up for sale on monday and i had a call yesterday that someone is flying down tomorrow to look at the house before the home open on sunday :), just need to find that perfect shed up in...
Ahhh ok, so they're not 33" muddies then. Larger tyres can sometimes be harder to balance correctly..... Im winderibg if thats the case with yours, or if the tyres are slightly out round.
Mine...
No worries Dman
MR, how many other WA orders have you got mate?
Bought 3 soft shackles from the UK, about half the price of the U.S. Ones
I got fed up with guessing about what ratio changes would mean to me, so the end result is this spreadsheet. Download and fill in the values in the grey cells...
Doesn't that give ya the shits....
Yeah why not! PM me bud with your details....
Gawd! Ya not wrong! Thats a big job...
As for me, I just looked at mine, parked in the garage. I contemplated removing the wiring harness in the engine bay, so I can send it off for the cut and...
We'll thought I better do a build thread rather then keep spamming my intro page
Picked up the stock standard 2007 Gu st-s in poo brown/gold nugget ( seems its a 50/50 split ) a few months ago to...
If its a Direct injection motor a 3" will suit it with no noise and a full flow Cat
The 2.75 is ideally suited to the later Common rail
Scotts Rods ,beaudesert, even Genie all make a great exhast...
Just do what the guys in Top Gear did, just shoot a hole into the floor with a rifle hahahahaha
If you have plastic plugs in the floor can I suggest you remove them
if you intend doing bogholes all the time, There is a great lift up drain plug the Comp guys use
may be of some good to you.
Can suggest you pop rivet your front number plate on.
All the really good bog holes are lined with number plates
Now you have a high tide mark, mark it with a texta, lol
now to better it lol
the joy of being tail end charlie, i was too far away to help lol