here is how I do it, diesel fitters might cringe but who cares.
1: cut the top off a drink can or plastic bottle to make a container.
2: remove the rubber return fuel line off the metal pipe and...
here is how I do it, diesel fitters might cringe but who cares.
1: cut the top off a drink can or plastic bottle to make a container.
2: remove the rubber return fuel line off the metal pipe and...
hey mate, I just put up some pix of my set-up, it is for a Y61 98 wagon but you might get a few ideas.
any questions or suggestions welcome.
It was built basically in 6 steps:
1: sub frame/shell made/fitted
2: top panels fitted
3: draws made
4: draws fitted with runners
5: draw fronts made,...
Hi all, thought these pix might help anyone looking to do their own draw set up.
Materials cost under $300. The most expensive bits were the SKF bearings. The recessed part at the back of each...