Search:

Good work, basically that's all the HPD Maf housing is, BUT has slightly larger where the MAF sits, if I was to do it again I would do exactly as your doing and just hone the original MAF housing...

Not sure if that theory is correct, yes in a standard air box lid the dust particles will form in a area very noticeable to the eye, But I would also suggest this is due to the restriction from...

I'm using the QFBA, works well to bring boost to gauge, gauges are auto meter type and keep kicking myself I didn go redarc, dislike the noise from gauge but it works, have inline filters to but does...

Would like to try and make this, will be either there or up around Tathra at that time, will know closer to dates.

Parked on a street near east Melbourne for specialist appointment, come back from there and the patrol was gone... yep she got towed to the Collingwood depot, Melbourne city would like to thank you...

Yes I would like to become a vendor sponsor, and understand, just need to sell some rods/restorations to make it viable, cheers and when things pick up a little I will send the PM.

Had the DP chip installed today and dyno run done before and after, result from fitting DP chip was a 20kw gain at the wheels with a conservative setting on there dyno, from the short test runs there...

Know someone who is in a process of a conversion, had got near 300 tho out the original engine and then its gone and cracked a head, had a heap of extras on it and not even 12 months ago spent over...

Had some interesting emails with DP Chip regarding the HPD Maf housing and HPD airbox lid with there chips, it all but confirmed my findings to date, they said it is there recommended modifications...

Thanks, recovery points sent Monday arrived first thing Tuesday, excellent quality and very happy, will put some pics up in my vehicle thread soon.

Installed the HPD MAF housing the other day, noticed a drop in performance in mid range power but was able to up the boost significantly and lower EGT's, so installed the HPD Air Box Lid today and...

When we bought our Patrol last year, it wasn't a question of if we were to fit NADS but more of when, been happy with the results so far.

Interesting differences in EGT's, I can only get max 14 psi atm but have something to try soon so hopefully can get the boost up a bit more, when we went from Yarrawonga to Echuca along the Murray...

Went the Penrite path in the auto recently, first used semi-synthetic and was good for a bit then noticed I was getting some slippage on trans when releasing and then reapplying throttle but not all...

Was doing my head in adjusting the dawes and needle valve when I first installed it, ended up being MAF issues and once I sorted a replacement it was a lot better. Trying to get the same psi ranges...

Very nice, be on the list to do, just need some 4wdrivers to do it with. Thanks for putting the pics up.

Makes sense now, thanks Agronaught. I can see that mine is hooked up wrong or different from previous owner, tho still works, with both batterys are continuously linked until the starter drops below...

Will keep an eye on this thread, as in similar situation, tho already have a dual battery setup with a redarc, BUT it is the very basic one I think in that it runs of the alternator and chargers the...

The black one, pic posted by mego is the go, they also make the non jointed one in black to if the fish are a bit shy, if there is a good moon with light then they can work a treat.

This is exactly what I want to put on my GU, BUT when I bought the vehicle it had brand new 265/75/16's on BFG A/T, they still don't have 5k on them so cant justify doing the changeover yet price...

A couple of builds,

One for the Ladies. Built on a MHX 6-12lb blank with Microwave guides.

520035200452005

One for the Kids built on a 6-10lb CRB Blank, with a yellow and black theme for...

Hi Mego, will put a couple of pics of my recent builds, tho prob not for everyone as one was for lady who wanted pink and a bit of bling, we have a Face book page @...

Wont recognize it by the time your finished :D, looking good.

Dam, I will most likely be up the other way near Yarrawonga around then visiting family, would of liked to pop in and say hi, looks like a nice spot.

The turbo heat shield makes a huge difference on heat and would think it should be fitted. I tried mine with out it fitted after putting a new exhaust on and the heat coming of the turbo was a lot,...