Search:

I know i will get flamed ... but everyone who says you must you the proper MAF cleaner really dosent do their research or is a panic merchant being bought by the marketing.

MAF cleaner, like the...

MAF cleaner is basically electrical contact cleaner
I still have cans of Dick Smith contact cleaner, and been using them to clean MAF sensors for years
Jaycar sell contact cleaner - from memory...

Are you just going by the dash temp gauge?

If your not aware, the standard temp gauge is not a good indicator of actual temp movements.

I have an ultraguage, some others plumb in a water temp...

Fraser Island Cathedral Beach on NYE

http://i292.photobucket.com/albums/mm24/CaptianJack/Patrol%20GU%20VII/15875242_10209827760425620_1116375927362982028_o_zpsacmb4jxg.jpg

i had the same issue - im 6'5
I had the whole seat moved back 3 inches
New seat mounts made and engineers mod certificate.
Was the difference between keeping the patrol and selling it for me....

Been through a similar experience and it had a positive ending so stay positive because people can and do come back from such challenges - be strong, your family needs to you be.

here my garage - gave up the road bikes a few years back - had a CBR 1000, but like fun on the dirt now with my boy - even though I'm getting a bit old for it

CRF450 for the legal road to trails -...

I had one on my 2004 GU and i thought it worked a bit - at least i noticed it get a lot more dust on the back door after it got ripped off under a tree. :icon_bonk:

But perhaps that was a bit more...

I'm using a WIFI ELM with DashCommand and my spare Iphone, but thinking of buying an ultragauge (the programmable one upgrade one) rather than a scan gauge as i have all the codes and with the...

Yep that's the plan - that's why i wanted the higher racks especially to fit the awning up a bit higher. On my last patrol i had the awning lower and it was always getting caught in the door when you...

Well today's addition was roof bars and a bonnet protector.

Heading to fraser at Xmas so want to fit a decent sized awning.
Decided i needed three roof bars, and wanted higher set ones so is...

Next is a replacement inter-cooler. The stock one is leaking on the corners
So purchased one off ebay - yep i know, its the cheapy, but ive heard some good reports.
Fitted up well, also fitted an...

Catch can next on the agenda - decided no to go pro-vent, rather bought a standard can, mad my own internal baffle and filter inside it.
Mate of mine has a pro-vent, and since fitting it had a rear...

Next on the agenda fitting the UHF, mobile phone cradle and GPS, plus UHF antenna on the bullbar
...

First item on the agenda - window tinting for the hot QLD summer ...

Front Drivers and passenger legal tint, rest went a fair bit darker - luv the finished look and works great inside ....
...

Well though i would post a few pics.

Bought by 2011 GU CRD AUTO about 2 months ago now - was very stock standard on purchase, but a pretty clean rig under 70ks

Its my daily drive, but want it...

must take top and bottom out for even pressure.
10,000k since i took mine out, and not a hint of the return of the death wobbles....

actually, did a little more digging -rather than give you the wrong info - heres the exact spec from the service manual
...

well ive got a EGR solid plate - not hole it in - when i scan with my wifi and iphone using tourqe its got a fault code of low EGR flow, but no dash light - never had one yet. Im in a CRD but out of...

this is another good video on the same subject and explains it well
https://www.youtube.com/watch?v=xPLgglRbDF0

http://www.are.com.au/Inter/topMountIntercoolers.htm

it could be lots of things, that's the point of that light - its a warning that says you need to get it checked ASAP. You need to get the codes read to find out what it is and not drive it much...

Ok - so i know some will say use the search - but i have.
And once you read my post below I am sure some will say yes, and some will say no - this is the problem with the internet i guess ....
...

Well there you go - a few hours in the garage today, removed the shims of both front wheels, and wallah -no more wobbles.
Still a slight vibration right through the speed range, so in for a balance...

Wow - took me a while to read through this thread - interesting jobs in here.

Reckon the Building/Construction industry wins for the most patrols owners in a particular category

I'm the same,...