here goes....
- Jumper leads
- different sized hose clamps
- cable ties
-electrical tape
- "rescue tape" (awesome stuff)
- butane powered soldering iron
- multimeter
- coat hangers, couple...
here goes....
- Jumper leads
- different sized hose clamps
- cable ties
-electrical tape
- "rescue tape" (awesome stuff)
- butane powered soldering iron
- multimeter
- coat hangers, couple...
DONT GO TO ARB. My dad got a dual battery system for his pajero installed by arb with two anderson plugs in the back. They did a shocking job, only ran one lot of wires to the back then piggy backed...
That sounds like it should work. I am planning on doing something similar in 2 weeks.
Except i am only using one gauge, a 1/32 din sized volt meter from jaycar that has 1 +ve input and 1 -ve...
I did some 4wd training a while ago in the vic high country with mountain top experience.
Thoose guys use and swear by these crates, they are milk crates, if you can get one of them you can cut...