Hi peoples
Fitted boost gauge to mates patrol ,took it for a run 4psi max WTF !!!!!
Had a look under the bonnet saw turbo actuator wasn't moving when revved HMMM.
Checked a few things checked...
Hi peoples
Fitted boost gauge to mates patrol ,took it for a run 4psi max WTF !!!!!
Had a look under the bonnet saw turbo actuator wasn't moving when revved HMMM.
Checked a few things checked...
I'm going for the Storm but I reckon it will be a close game .
Half of the Queenland State of Origin players are in each team .
So I think it will be a close game .
The people next door are...
Hi Guys
The towing setup in Doms first photo is called a "Hitch and go". They have a cable that passes through the firewall of the towed vehicle
and attaches to the brake pedal , with an...
Put a smile on a fellow Patrol owners face today .
Seems he swapped a Navara for a early model Zd patrol ,without getting it checked out first ,ie test drive ,mechanical check etc .
Says the check...
Thanks everyone for the feed back .
No I did not fry the ecu or anything , just needed a really good bleed and a good squirt
of Start Ya Bastard n she kicked into life .
Once again thanks...
Wizard2
You might need one of those ARE scoops that 3D reckons are the ducks nuts .
Use it or loose it.
That's what the A/C guy said when I took my Navara in to get regassed .
Partners son been driving it ,turned it off cause it uses too much power lol
Great write up
I need to do this , just need to find some nice flat concrete in the shade to work on .
Will get the kit from Allied Bearings in Cairns .
Hi guys n gals
Success ...I have a friend ,who is a dab hand at fixing things have a look at my head rests .
Well he managed to push n pull the posts n uncover the thread on the end n screw it in...