Search:

Thanks gents, I’ll work through those things. I’m fairly onto the maf sensor and have cleaner for it so do it frequently.
Clunk, as for the accessories, if anything I’ve made it lighter.

Thanks...

Can’t really help if it’s a big problem but I’d be cleaning it all up with some degreaser and a brush. That way you have a better judge on how long it takes to seep out.

This one is a round plug so I'll see how it goes.

After repeatedly bending up my trailer socket on the old bracket I decided to buy a new one and put it in the bumper. http://www.nissanpatrol.com.au/forums/images/imported/2017/07/330.jpg

I got a set of these from the US. Think they're brilliant
http://www.opt-7.com/fluxbeam-x-motorcycle-led-headlight/

I've not used their kit however I did get a gas strut from a caravan place and it works well.

I have their winch as well as a side awning. I run an ARB rear awning and there's no noticeable quality difference.

Thanks guys, I already lock my hubs to lock anyway when airing down so difference to this lazy jack arse. Haha

I'd go air compressor, snatch strap and shackles, rated recovery points, 2" lift, 33s, off-road course (assuming you're new to off-roading), bullbar snorkel.
Why, is because with an air compressor...

This thread of mine might help in regards to mounting and also rotating the clutch lever.
Tigerz11 Dominator in GU series IV Std Steel bullbar
...

For anyone who searched this in time, the above pic is the speed sensor and it connects directly into the Marks adaptor cabling.

Sold. Thank you.

If I had the choice between Freo or Perth I'd pick Freo every time. Can go to the War memorial, There's a couple of different Freo Jail tours, roundhouse, Maritime museum, grab some fish and chips...

I had one installed on Saturday and had replacement 4.11 diff centers put in at the same time. I got to the mechanic at 7 and was gone by 1 and that was putting the back center in also. Didn't look...

Changed the diff ratio from 3.54 to 4.11 and added a front locker whilst they were out.

More additions. Pretty much done.
http://www.nissanpatrol.com.au/forums/images/imported/2016/10/303.jpg

And an Engel plug at the back. ...

Thanks Guys. I'd more want it in a addition to my built in uhf Mudnut and wouldn't permanently fix it. Would be just for when I got out of the vehicle when 4wdriving. [emoji106]

Going away next weekend and still haven't had time to finish my wooden battery box. So I decided to move the arc one across to the other side and extend all the wiring, a job that that had to be done...

Not sure about the relay question however I can take a pic of the fuse and both relay boxes in the morning if you like.

And now my most recent projects.
Fitted new breather lines today, just extended the front three from the current location and ran a new line from the rear diff. ...

I've installed both rear and side awnings, I just find the rear one handy for coverage when using the rear shelf or just a bit of shade on the pit stops. ...

Some other things I've had made or just bought.
http://www.nissanpatrol.com.au/forums/images/imported/2016/09/227.jpg Black widow shelf with checker plate and led strip on the back door.
...

Hey All,
I've been on here awhile and had a heap of different questions all answered by some smart cookies.
I love to tinker so thought I'd start a thread of different things I've done and will...

You're a legend. Thanks very much. I didn't even see that extra fuse box under there. Cheers.

http://www.nissanpatrol.com.au/forums/images/imported/2016/09/15.jpg