The other mob got back to me, $500 to mod the hose! So I ended up taking the chance & bent the pipes. Had the ol freckle puckering waiting for the line to crack. Got it where it needed to be without...
The other mob got back to me, $500 to mod the hose! So I ended up taking the chance & bent the pipes. Had the ol freckle puckering waiting for the line to crack. Got it where it needed to be without...
Well it’s been a yr & 8 months since my last post & has taken me that long to find a suitable Patrol. Guess I’m a little to fussy lol!
Not a Ute but it got to the point where the first decent...
Well I crunched some numbers with the formula for working out the crawl ratio. I'll list 3.9, 4.11,4.375 & my 4.6's as it may help someone else who may stumble upon this thread. Firstly If I run 63%...
Grave dig. An update on the GQ. It died in Jan 2015. Bought the GU in July 2015. Transfered some gear & wrecked the GQ out. Was a sad day to see it finally go but needed to move on.
65731
65730...
Thanks MB. Yea patrol A part sell the Concept 4x4 pods. Just personnel preference, but I Prefer the less chunky ones (Hope my missus doesn't read that lol). Anyway thanks for the info, may have to...
Thanks Threedogs. I just emailed 4X4 concepts asking if they have changed their design. I don't like putting anybodys stuff down. But I had to tell them I didn't like their current one.
lol yea I agree. Miss the ol GQ!
That's it Todd. I'm not 100% what is going on, but I hear talk that the laws are in limbo & are being sorted to be executed soon. But that is all here say.
Never been hassled by coppers. Once in my old GQ 6" lift & 35's I was towing the wife's horse float that was unregoed & went past the HWY patrol parked on the side of the road. His camera picked up...
New South Wales.
NSW. A few years back I engineered my GQ with 6" lift & 35's. Engineer said it would be a good idea to engineer the turbo setup aswel as GQ TD42 never came from factory with a turbo. Cost me an xtra...
I booked in for the lift & tyres. Got quoted $1200. Turned up & he asked if the engine had been touched, bigger turbo etc (no) just the 3" Exhaust. he done a decibel reading & it was to high. So I...
Thanks nissanGQ4.2 I was typing & posting as were obviously lol. cheers.
"Edit" Ha just looked at the times. your post didn't come up when i looked back at the thread the 1st time?
Surly you understand? Anyhow, if you go to an engineer & want to engineer your 4" lift only & nothing else he wont pass it if you have 35's on it or a bigger exhaust etc etc understand? if you add...
NSW. I engineered my GU late last year for 3" exhaust,4" lift & 35's cost me $1200 & that was with the swerve test & brake test. Passed with flying colours. Your whole vehicle has to comply...
Most of the times it's locals that destroy there on places. The scumbags of a town. I know who dumps the cars out here, but as yet a failed to get proof. One day they will come undone.
https://www.facebook.com/unlockaustralia/posts/643524675670372
Maybe someone here knows of these morons!
Well Todd, the last person that ripped me off $1200 was from Lavers Hill VIC. He got a visit from me & my mate. Cost him the $1200, $500 interest,Expenses & learned not to f@#k with the wrong person....
[QUOTE=Drewboyaus;337537] To complicate matters I might be moving to a new employer where rather than FMCV I'll receive quite a generous car allowance. That said, for a work vehicle I want it to...
I run the 30 mtr ebay rope on my xd9000. Great stuff. But watch when winching that the rope doesn't bunch to one side. Mine did this when my son was winching. I was at the back of the vehicle, Busted...
Dx's have vinyl floors, no top covers on the doors & the roof lining stops at the top of the front pillars. ST's,RX's & TI's Have carpet,top door covers & the roof lining continues down the front...
My personnel choice is a warn. I got a xd9000 second hand for $600 4 yrs ago. Hasn't missed a beat. I did end up breaking a drum support due to my own stupidity. I replaced them with xd9500 drum...
That's what mine did. 2 times now.
John Spicers Mechanical in William st Orange.
http://newsmediaiframe.centralwesterndaily.com.au/iframepages/iframeArticle.aspx?id=2610276
http://www.youtube.com/watch?v=rk_DZrNnK8M
http://www.youtube.com/watch?v=rk_DZrNnK8M