Search:

Red arc all the way mate. Aussie made and a top Unit..
All you see I The toggle switch and adjustment dial..
Easy to use and easier to install..

No mate the scoop comes with a pattern where you cut the bonnet and drill the holes to hold it down, I think you could just drill the holes to hold it down and not cut the bonnet if you are using the...

Looking good MR,
@ dave x I take it your Patrol gets a little warm with all the accessories across the grill.
could try lifting the rear of the bonnet, Just silicon about 12mm of washers together...

It's just a bolt on pipe to pipe T clamp. Ring any steel supplier, or backwoods style store and you'll get them. Probably a lot cheaper to..

Kallen Westbrook
Owner of
Westy's Accessories

Chaz has but we don't see him on here anymore

here is a link 2 his website:http://www.chaz.yellowfoot.org/Lockup%20Trans%20Switch.htm

Engaging the front hubs occasionally and going for a drive is a good idea, it keeps everything in the front end moving and lubricated.

Drop boxes or extended arms if you got the coin, Doesn't have to be super flex arms there are others out there, unless you're after shiploads of flex then go the superflex. Yup the panhards adjust...

@ Dave clean your MAF sensor and re install when dry, Blocking the EGR also helps.
Wandering to left pretty hard would suggest tyre pressures, 40psi hwy and 35 around town.

Seems too many are...

yes, you get every thing you need for the EGT/Boost gauge, depends on what you are putting in the second "hole" of the pod

I brought my gauges from Extremelimitsoffroad, great guy to deal with...

Welcome to the forum mate, feel free to ask any questions and join in the conversations.