I came up with this idea for easier speedo adjustment. I drilled a hole through the cluster inline with the resistor. This way I can adjust it without having to dismantle the cluster. When...
I came up with this idea for easier speedo adjustment. I drilled a hole through the cluster inline with the resistor. This way I can adjust it without having to dismantle the cluster. When...
These guys show the installation of the Jaycar Kit ...
http://www.youtube.com/watch?v=bMs7w72QTVM&feature=share&list=ELSQ4TWTlvef4
Correct, the sensor relies on contact with the coolant. The TD42 sensor is mounted in the housing coming off the head .. It may still pickup temperature conducted along the metal, but I'm not going...
Status Update:
Not sure about repairing the RL panel damage -- I'll probably just make it look worse. There are quite a few complex creases. I think the best action would be to cut it out, then...
PROGRESS REPORT
Please ignore all the mud and dust .. I don't want to wash it until I have primed any bare metal areas. I know this should have already done, but spare time is a bit limited these...
For anyone that's interested .. here's the progress report:
Found all the required panel in the correct colour (what an effort that was). Not going to worry about replacing the roof panel, its...
RHS - RR Door and FR quarter damage. I have already straightened most of the gutters.
------------------
http://i1160.photobucket.com/albums/q494/spektrum426/Nissan%20GQ/DSC_3390.jpg
Front...