From the back of the PCB - it was near the top right corner - I pretty certain the board was labels on the component side.
From the back of the PCB - it was near the top right corner - I pretty certain the board was labels on the component side.
I fixed my speedo.
Mine developed a fault where the needle would swing all the way around intermmitantly, if I taped the top of the dah it would start working.
I would a couple od dry solder...
Have a read of this mate...Good info about your question.
http://www.nissanpatrol.com.au/forums/showthread.php?14282-GU-%28TD42%29-NA-injector-pump-vs-turbo-injector-pump
Try your local tyre/suspension/4x4 shop surely they would know the latest rules & regs,
Good luck.
Pretty sure they can be reconditioned depending on the damage mate.
Yeah mate - had steering but started getting heavy as I lost fluid on the way home - I didn't bend any arms, but the shock damaged the box and I had to replace it - centred my steering wheel back up...
1 - 2 Nm
0.1 - 0.2 kg/m
0.7 - 1.4 ft/b
not very tight.
I'd be having a look at the hose from your PCD valve on top of your Rocker cover as the most likely cause mate. very common to leak and...
Have a read of this as well...
http://www.nissanpatrol.com.au/forums/showthread.php?2584-Child-anchor-point-locations
Hi Kai,
There are bolt holes on the floor just behind the second row seats for the child seats to go in the left or right hand side of the second row seats.
You just need to buy of these below...