Search:

Hi to everyone
Just introducing myself as I've purchased myself a late 04 GU ZD30 wagon. I have had a few 4WDs before, but never a Patrol, and so far I love it. I had a bit of a hunt online and...

From my FB page mate….

“Well, 10pm Last Tuesday night, we made the decision to drive up to Beth at Nockatunga station to help her get out of that prison camp, which made Beth so miserable for the...

Tassy Happy [emoji846]87934879358793687937

.......from under the great down under.

They are great, bought one in 1988 and yet to use it in anger apart from rooting around in the backyard testing it. I see yours has a gas bottle - must look at mine to see if it has that flexibility...

So I have been chasing one of these for about 15 years. I have been deep in the Otways and used one in anger to weld a himount brakeshaft back together and when I did the Madigan 12 years ago 2 of...

A bit more progress this weekend.

Brought some insulation and made my own shades. Neeed to take out the fridge and cage to do the L/R side. Bit average on the inside, but they work. Simple velcro...

GU is now 18yrs old and goes to Fraser a couple of times every year so rust was always going to be a problem sooner or later. Had windscreen replaced many years ago and a dodgy job did not seal it...

G'day
I'm Dan. Perth these days
Don't own a patrol, but I do a bit of work on mate's and mates of mate's patrols.

https://patrolapart.com.au/product/genuine-nissan-patrol-gu-radius-arm-trailing-arms-panhard-rod-bush-set-kit

Steering getting a bit vague. Since I'm in the bush mode I thought I might as well do...

Well after leaving home at 10pm Tuesday night to get up to SW QLD to get my daughter away from this toxic and abusive environment she’s called home and work for the past six weeks, at 5am, 240k south...

Hey there everyone.
My name is Jay and have been slowly building “Patrica”, my 89 GQ for the last few years. She has always been my daily and although she’s a pain in the arse, I love her. ...

i made obnoxious noises with the gq..

well i took it for a trip around the block... manages to hit 500c at about 110 when i lift... got the alarm at 550c
tops out at about 1.4 bar
may need to get this thing tuned

Had my Ryobi folding shop light fall off the ladder today, it was about a month old. Decided to call in to Bunnings and see how I go in getting it replaced.

Walked up to the counter and told the...

OK all you travellers worried about excess weight, I have a solution for you.

87925

Get your orders in and I can arrange a pallet load, but be quick!

i fired it up today.... need to sort a catch can.
it idles a bit high.. 800 cold it used to be 600.
at idle it got to 100 deg exhaust temp only ran it for 15 mins or so to bleed coolant etc....

Greetings there,

came across this forum in search of a manual for my TB45E, figured I might as well sign up (and then noticed that I have to.
Anyways, myself, 27, originally from Germany. Moved...

Just wanted to say hello, finally got myself into another GQ, its been a few years between owning the last one. The new rig is a beast with a stock LS1 conversion. Previous owner looked after the rig...

Hi everyone from Auckland New zealand

Getting closer, inch by inch. Ran the big wire down to the back today, sheathed it in 3/4" heater hose for mechanical protection, spent a good 2 hrs resolving a potential hot spot where Brunswick...

put coolant in it and fresh oil. replaced the filters, wired the cooling fan for the intercooler, painted the frame and made a exhaust manifold shield.
just got to sort from the inter cooler to...

Yeah - ha ha.
Plain english, aussie bloke/shed method.

On the end of the hose that goes from the fuel filter to the engine, temporarily fit a 3/8" (8mm) brass tee and an extra bit of fuel hose...

Thanks - your instructions are easy to follow and the fit-up is very simple

I run something similar using a 5 pin relay.
The park light power goes to the centre pin, the reverse/camp floodlight...

All sorts of screams will come from what I'm about to say..........

"Use sump oil, and turn the chain oiler up full"

Sump oil (engine oil) contains detergents. Plenty of oil helps the cut and...

Yeah - but they post a lookout.............. "CAAR, CAAR! "

Trouble is they still get cleaned up by trucks and motorbikes.

As far as roos go, the best way to avoid hitting them is not to have...