Just brought back some Meguiar's 'Scratch X', Smooth Surface Clay Kit and Ultimate Polish to put on the 'trol before heading west, I've used the Scratch X and Polish before, they do a nice job.
Just brought back some Meguiar's 'Scratch X', Smooth Surface Clay Kit and Ultimate Polish to put on the 'trol before heading west, I've used the Scratch X and Polish before, they do a nice job.
I've got a question on this as well. If the car is finished with a clear coat doesn't a cut and polish result in a dull patch?
Just asking as my wifes car (naturally a Nissan) had a mark on the...
depending on the depth, but a good cut should get rid of it.
Obviously followed by a polish then wax.
If your feeling game, a fine grit (1600+) sanding with da sander then a series of cuts,...
Yeah X 2 young guy across the road details too and take plenty of time doing things you wouldnt
think of doing, very thorough in deed, worth the money as its only once or twice a year
If it's deep into the paint, you need to cut and polish. You need a good product (sorry SCA) like Meguiars and that can be expensive. It may be easier and cheaper in the long run to get a mobile car...
40 psi if on the hwy, down to 20 psi off road lower on sand.
Outback roads around 30 psi but drive to conditions
Around town 35 PSI, thats general give or take to suit your needs
Lowering...
go get your Patrol detailed with a cut and polish,
if its too deep it may need to be filled by a panel shop
Mine does the same its only the thrust bearing or carrier as mentioned I had a vl turbo that did it and I left it and that copped a lot of abuse I didn't worry until I changed the clutch and that was...
I run the standard road pressure noted on the tyre. I lost 2 tyres to slashed sidewalls when I used to run Bridgestone DD's, one 2 weeks old but have not had any issues since switching over to...
Even if you only lower to 30 psi it helps,
at least you can drive on hwy if you forget your compressor
you're getting good miles from your Patrol thats for sure
I done some research for you. I used the GDA Dept of Lands Barrington Tops 9133-1N 2nd edition map.
There are parts of the bicentennial trail that are 4wd trails. From Stewarts Brook the...
Getting onto it soon.
Just looking for remotes I like.
Evo
This Trail links eighteen of Australia's national parks and more than 50 state forest providing access to some of the wildest, most remote country in the world.[5]*The Bicentennial National Trail is...
Toad,
It depends what areas you are looking for, but in Vic, the Rooftop Maps, are the best, followed by VicMaps.
Mic
Most 4x4 shops bcf camping outdoors racv any thing out doors will have them
Yeah when I replaced the clutch in mine I greased the carrier up and was all quiet. Around two month later it went noisy again and haven't worried about it since...
The clutch release bearing carrier is rattling on the nose cone. When they are greased up you won't here it. Once the grease dries out it rattles again. Or, it's the bearing on that carrier. Could be...
Get ready for the bug to bite deeper and deeper with every trip
Toad,
The factory style remotes are between $80 - $100 at Mr Minit, and they will code them for you, or provide the instructions on how to code them in.
I just bought one for my wife's BA...
Welcome to the forum mate
For 2006, standard tyres were 275x65 R17, with a factory option for 265x75 R16 (except the DX)
If you have the current (working ) key, most Mr Minit etc will replace the shell, but I suspect they...
look forward to some pics mate
The stats at the end of the video are a concern.
http://youtu.be/3Fq0nh31BPs
G'day Toad,
Welcome to the froum mate! .... I know who I am gonna hassle now (just kidding) sounds like youre gonna have fun with your patrol!