The .64 will get it boosting earlier and with the 2860 will be good for your desired boost pressure. The .84 will be lazier but will work a little better up top and by up top I mean from 3000rpm...
The .64 will get it boosting earlier and with the 2860 will be good for your desired boost pressure. The .84 will be lazier but will work a little better up top and by up top I mean from 3000rpm...
best off with the copper heavy duty one, cheaper than alloy and will last longer
I think it will start with ve, then maybe followed by a 6 then a 10. I'm not sure if that's the part number but it's an id. It will make sense when you find it on the pump lol.
Sorry I don't know much about winches, nice looking rig though and the alloy racks look much better black =)
Yes you should use the sender that suits your gauge.
G'day Casey,
ARB have replacement solenoids for $40.00 each.
I have attached the Parts list and exploded views of the winch. (Its not a good scan sorry)
Cheers,
Rob
nice rig mate its good you can pick up a cheap gq and fix it up for quite cheap, i like it
There are roads that are open, but most of the harder tracks are closed.
Pick a route through, and then check the names against the Parkweb Database to see if they are closed or not.
Mic