Been flat out at work lately, so haven't had a chance to get out and work on it unfortunately. And when I do get a chance it's been pissing rain, hopefully get a chance to get out there this weekend...
Been flat out at work lately, so haven't had a chance to get out and work on it unfortunately. And when I do get a chance it's been pissing rain, hopefully get a chance to get out there this weekend...
You can get some alright looking ones off eBay, would definately be my preference over checkerplate or ally sheet:
...
Welcome to the forums buddy
Welcome aboard mate :thumbup:
Seen a few guys mount on on top of the center of the dash, you could get one looking pretty good by cutting the bottom of a spare dash center and sticking it on top of the current dashboard
So I finally got around to gutting the interior during the week after work:
http://www.nissanpatrol.com.au/forums/images/imported/2018/10/202.jpg
And then tonight after work I sorted out the...
All depends on how far you want to go with it.
For a quick neat solution I would just simply clean it as best as possible, wipe it down with some red scotchy that is wet with Prepsol (wax and...
Managed to pick up a set of wheels and tyres for this thing locally last night, even if I don't end up using the tyres they will do the job for now.
Best part is they were only $400 :Yahoo!:
...
There's a few threads floating around here from others that have done it:
http://www.nissanpatrol.com.au/forums/showthread.php?40729-TB42-to-TD42-transplant
...
Ohh and if anyone local to Bendigo is interested there is a GQ single cab ute still out on the farm where my GQ was, you can kind of see its rear end in one of the pictures. The front of the chassis...
Yeah I'm going to be using the PSR dual cab chop tray mounts and they come with fishplates for the chassis. I'll also be using their weld in coil tower braces front and rear [emoji106]
Sent from...
Hey guys, recently stumbled upon this glorious (or not so glorious) sight out on a mates farm:
http://www.nissanpatrol.com.au/forums/images/imported/2018/10/141.jpg
It is, or was, a 1996 TB42e...
I might have something for this I reckon.
November 2008 I was working night shift in a local Steel foundry, 10minutes before knock off things start to go pretty wrong for me. Pretty sure I said...
Definitely shop around for those KM2s, I paid $329 each fitted and balanced for 35's
I paid $500 from Anaconda on special, however at times you can find them online for buy one get one free.
Been a while since I visited it seems!
I have -22 offset wheels, so I only really see rubbing on the inside of the rear wheel flare. A 2" lift would be all you'd need to run 35's everywhere...
As soon as we had pulled the tractor out, I knew I should of got a pic. I was too busy laughing my arse off at the old man. Why he even thought he could put the tractor where he wanted to go :/
Yeah no dramas at all. Had Faaaaaaaaarrrrrrrr more trouble getting down to it, and then back out again. The land has been grazing land for 11ty billion years, and they've recently divided it into...
Cheers for the comments guys. Progress will be slow, but I'll get there in the end!
I was also a Ford man ( BA Turbo was the car alluded to in the first post). I have one of these full of Carling...
Extractors and eBay catback.
Mine has extractors, and is in desperate need of a free flowing exhaust.