Search:

If its the same as most others I've seen it should be fairly easy to tap out with a screwdriver and a hammer. Getting a new one in it is important to get it in flat, an installing tool (anything...

Really sorry to hear, they really are mans best friend.

Looks normal to me

350 deg is fine.
I look at it like a cooling system, they can run all day at around 100 deg but if they go over their safe temp things go bad. EGT's are similar, as long as they stay below 500-550...

On the top of the steering box you'll find an adjustment screw (flat blade) with a lock nut.
I found it easier to do it with 2 people.
Get your assistant to hold the screw while you undo the lock...

I don't think our government do anything very smart but I agree with the others, unfortunately one of the drawbacks of few people/large area is that our roads and such simply can't be expected to be...

Some new cars on gas have a tar filter that gets changed every service, might be able to be retrofitted???

Did you bleed the shocks, or just bolt them straight in?

The apple debate is as bad as religious debates! People seem to be fanatical and so fired up, I've got iPhones and iPad and am very happy. Sure they are more controlled than my PC etc but I can...

That won't be easy!

G'day Adam, I did mine a few months back and they have sealed fine without any silicone but I can't see any harm.
Make sure you do them all together (I did one separately first as I was on going...

Trimatics and Aussie 4 speed blocks had one bolt pattern, blocks used on turbo 350/400/700 engines were 'Chev' pattern.

I had a similar issue which was the same thing as Westys. I ended up parking the car on an angle and getting my old man to rock the car, I could feel the clunk through the radius arm. Tightened the...

Gen4's are great engines. Heaps of torque everywhere in the rev range, very smooth power delivery for 4WDing and also quite fuel efficient for what they are, maybe one day!

Power steering coolers are used on heaps of cars, often they're just steel line rather than having cooling fins.
We used to fit them when we fitted heavy duty tow bars on some models.

Give Glenroy Exhausts a try, I used to rep to them a few years ago and they seemed pretty good.

I've got one on mine (sounds like a similar price to what you paid), very happy with it.
Power increase is impressive. Noise wise - it's not loud, the only time you really notice it's louder than...

Top of Blue Rag Range Track:
http://i160.photobucket.com/albums/t164/gordy308/High%20Country%202012/DSCN0850.jpg
...

Even if you're not going to bed at dusk, surely no generators just for the 'serenity'???

Why has the cooling system been touched on a 2010 vehicle? If something needed replaced it should have been under warranty, if nothing needed replaced I would thing the original coolant should still...

They help with the gardening too.
23065

It's great when they hang around isn't it...
Here's one of my buddies that pops in for a chat:
23064

Hey Benno, do you need to replace the whole assembly or just the mast?
If its just a mast you should be able to just remove the chrome nut at the base of the aerial mast and use the motor to drive...

Mine is the same on a hoist but the LSD works a treat on/off road.
I haven't looked into it a great deal but I believe they are a different style of LSD to most vehicles, I've read somewhere that...

I'm pretty sure it's all CRD's too.