Torque is in 2 stages. Stage 1= 39-44Nm. Stage 2= 59-64Nm.
Inlet valve clearances are both same & are 0.030-0.040mm (warm engine)
Torque is in 2 stages. Stage 1= 39-44Nm. Stage 2= 59-64Nm.
Inlet valve clearances are both same & are 0.030-0.040mm (warm engine)
G'day Jorjina welcome to the forum mate.
Welcome to the forum mate
Welcome mate, surely the best forum on the net. If you need it, you can get it, if you want to know it, just ask it. If you want to find it, go to the search bar for a universe of information. Enjoy...
Did you bench bleed the clutch cylinder?
Location?
Do you mean the flywheel is hard to remove?
What clutch did you use?
Did the noise stop the engine? Was it a rotational noise?
Welcome to the forum mate, feel free to ask any questions.
What are the symptoms ..... no drive, not starting, no power?
Gday mate welcome aboard
welcome to the forum Jorjina, hope someone can help with your question.
G'day mate, welcome to the forum.....
Sent from my iPhone using Forum Runner
Hi mate and welcome,,,
post your question in the mechanical section you'll get a better response.
In the meantime jump in anytime and enjoy
2 view the map you will need Google Earth installed, click on the link bellow then either save the file and open in Google Earth or just Open in Google Earth when asked. It will open under your...