Search:

Seats look real good Parksy, something i have been thinking about. Recaros & the like are nice but waay too much $$ these look like a very reasonable and very good option.

Also might have...

Hey mate, nice seats. How is the sideways fit, e.g. seatbelt stalk and is the seatbelt able to hang down properly when you take it off?

Every time I read your build thread i want to do stuff to...

You did the right thing fixing it properly, after looking so far of your work ethics
I feel you would be disappointed if you took the short cut with Chemiweld.
Basically you now have peace of mind...

You must have the cleanest Patrol of all ,,, well since they started making Patrols
Ive never seen one cleaner, Kudos to you. love the tint too BTW

Shiny new grill, bonnet etc..... they've pulled the bar back in place as much as possible, so I dont have to scrabble to get a new one quickly
They didnt replace the bonnet protector though just cut...

You are going to have some trouble with those, you put them in upside down and everything will fall out.

Parksy your Patrol has to be the cleanest, most looked after GQ in Australia.
Its better than OE and should be in a Nissan Patrol Museum for all to admire, lol
or out on the tracks doing it thang...

Well it is a GU [emoji12]

Hey, that's a great looking little engine. You have to be proud about how that turned out.

Thanks for the reply to the questions. 👍

Sent from my A1601 using Tapatalk

I know i will get flamed ... but everyone who says you must you the proper MAF cleaner really dosent do their research or is a panic merchant being bought by the marketing.

MAF cleaner, like the...

Good to hear Parksy pain in the butt but worth knowing it's good now. Should run like a dream now. .

Do not put chemi weld in a new motor.

I know its a pain but I would pull the motor back out. Its all fresh in your head so shouldnt be to much of a job. Annoying but you have come this far and...

A good run to fitzroy falls and back wont go astray......if you're still down that way

Just drive it mate.

Start it initially letting it run while you do a check for leaks or anything odd etc. Then shut down and re check fluids.

Then just drive it. You need varying load on it...

Looks and sounds awesome Andrew

Okeydokey,

Have been busy as in the run up to Christmas, looks like I won't be on the road til Jan now, BUT have gotten a bunch done and I can see the finish line ahead.

Have finished all of...

Also, if you don't mind, what adhesive did you use to glue the carpet to your roof and pillars?

Did you glue, or use the same glue,on your door cards?

Why did you screw the roof lining to...

Must be a top secret ASIO valve - finally found the answer at 2am in the morning after a night of searching.
Honestly.... what's the deal with the TB42e ?? There's less secrecy about the plans for...

There has been a few products over the years that run a similar idea and have worked well, Waxoyl was very much like your idea but used parrafin instead of beeswax.
Maybe a combination of beeswax...

Wow.
Coming from a engineering background this is brilliant. Would love to get a lathe and mill to do some handy work. Did do a piston for display purpose once. Still got it in my cabinet with my...

Now to Super charge it

I wonder if I can get this in a Lego Technic box?

Awesome work, I know a few guys from the airport that make steam trains and Boilers.
They needed a boiler ticket to operate them.
70cc on methanol would boogy, when
you consider how fast a small...

Simply awesome mate.
Brilliant finish with it all..

I went to country show a while back and all the steam engines and tractors still make me moist lol..
I'm afraid if I get into it I'll live in...

Wow that's awesome!! That V8 should go in a Bike!! What will be the displacement?

Wicked!!