Search:

RIP rocket mk2.

So she's gone... Sad they indeed. But finally lol.
Hopefully the bloke joins up here .

Sent from my SM-G920I using Tapatalk

Intercooler and scoop fitted. Just picked her up before fresh off the dyno. Quick run shows there is definitely potential. From the drivers point of view will getting some used to the scoop lol.
...

I chickened out of cutting mine too, only cost a slab of crownies to the panelbeater. He said don't use a grinder, and used an air hacksaw.

Finally had a moment to check out the full contents. Everything checks out, no dents, as far as I can see everything needed is here.
Got to actually see the true size of this cooler by holding in...

Got external speaker wired into the uhf, cable tied it to the steering colum..
Also finished wiring the light bar.
And installed the winch isolation switch while it was apart..
Also fitted a 115mm...

I dont just say stuff for the sake of it...

Just wanted to say hi to the forum, just upgraded from a 80 series cruiser which was all finished....had the works! now got a mostly stock gu so time for the fun to begin upgrading!

I wanted to...

Congrats mate! Love the color too.

We have only 2 rules here...
1. Introduction.. congratulations completed..
2. It's never true without pictures. Lol

Mate just sms-ed me telling me to stop wasting $ on my my rig and sell it and buy this, all pre-work done!.. And guess who's car it is lol.
...

All but sold it..
Be a sad day Wednesday or Thursday next week..

Took second battery out and front head lamp out..
Had the headlamp out to remove that stupid duct work anyway. .
Also put a fair wacky of it inside to so it's sealed from both sides..

Yea the stuff I used is odorless and sensor / electrical safe..

Removed both radius arms and put new rear bushes in. The two main bushes are less than four months old so i only replaced the rears, which were four months old, just to fault find this front end...

Need a photo...
http://www.nissanpatrol.com.au/forums/images/imported/2016/04/111.jpg

Awning.
Tick
http://www.nissanpatrol.com.au/forums/images/imported/2016/04/95.jpg

Hose clamped and test driven, big front mount, custom manifold and piping all done. Looking as flash as a rat with a gold tooth!

66237

@ Rocket I have front points for the 200 Ill PM you with some details
Congrats on the new wheels ,,,,power to burn twin turbo diesel V8 lol

I can imagine mate what what a rig to give away . Well not give away but you know what I mean. All that research and work put into it .

Sent from my SM-G920I using Tapatalk

Just a bit of an upgrade mate. Congratulations.

Sent from my SM-G920I using Tapatalk

So decided to pull the pin Rod.
Somebody will get the rig of all rigs.

I should just sell mine and pick up yours . Everything already done.

Goodluck mate.


Sent from my SM-G920I...

Mod list reads very nicely mate, no doubt someone will pick up a very nice rig!

So a bit of a change from your last Beach expedition then? Nice to hear mate

Sent from my S50 using Tapatalk

Now Ive done 285 kph on a bike but no way breathing
you would get me doing 140kph plus with my butt 3" off the ground.
respect to you for doing it and well going by the trophys