3mm gap from side to side not top to bottome, the sender hits the bottom then compresses the spring to sit flat in the tank, no low level warning light on it. ill try get a new seal and run some...
3mm gap from side to side not top to bottome, the sender hits the bottom then compresses the spring to sit flat in the tank, no low level warning light on it. ill try get a new seal and run some...
The tacho will only work if you use a td rev counter. Very easy to fit as the tacho will bolt into the tb set up. Youll need a pin out diagram and run the 2 wire s from the sender to the tacho
...
Im in the process of doing this conversion
I bought a dead td42, rebuilt it using turbo internals, turbo squinters(longer) up graded oil pump and turbo pistons.
I built it but got the machine...
if you buy a 24volt motor you will need to change the injector pump shut of solenoid to a 12volt system , youll also need to change the alternator to a 12v type. iv just had my 24v pump rebuild and...
no, still for sale, open to offers, need it gone as its taking up room
Sorry and thank you
Chasing a complete gq td42 harness must be complete with relays,holder,plugs and glow harness
willing to pay shipping
no crack pricing
Thank you
thank you for that