Wow it has been a while since I updated this thread. and yes the build progress is still painfully slow.
The vehicle is completed to the point where everything is fully functional and complete...
Wow it has been a while since I updated this thread. and yes the build progress is still painfully slow.
The vehicle is completed to the point where everything is fully functional and complete...
Tis about sums (:smile:) it up.
85563
Doesn't look too feral mate :)
Orange beast is still a labour of love finishing off all the minor stuff. Currently everything but the stereo is functioning.
Canopy fit out is 99.9%.
6x6 kit is in production!!! and with a bit of...
84986
84987
84868
84869
My set up is quite different.
I have two DCS (Deep Cycle Systems) 12V 200Ah Slimline batteries.
Because of the overall capacity, lithium benefits (such as rapid charging) and monitoring system they...
Great write up. I love going to Murchison House station and Dirk Hartog Island is on the Bucket list
Not rigid. It is a soft tail with an airbagged rear.
Rear end rises up 2-3 inches from stance in photos
My fiftieth birthday present from a couple of years ago.
Was a brand new Harley breakout heavily customised by Westside customs in Perth
81932
81933
81934
Here is a link to a Red-winch simple and cheap solution https://www.youtube.com/watch?v=eokeJokyX9Q
Haha debate is good.
It is a permanent fixture in the vehicle.
The finished deployment height is not set yet. With the deployed bench height set at usual home kitchen height, the drawers will be...
The box is the kitchen which slides out and then is lowered/raised hydraulically.
It looks a bit odd in photos as they are production stages.
Apart from the rotating arms and slides the rest is...
WOW last time I posted on here was 4.5 years ago and I still haven't finished!!!! :icon_bonk:
It should be finished this year???
It is a different colour now as the original painter completely...
Sorry I haven't updated on here for a while as I usually use explorer and this site won't load for me
Just tried chrome and it loads instantly.
I am now up to the stage where we have jury rigged...
First world problems I know !!!
But yes it will lift the LHF wheel.
It is a slightly detuned race suspension from Climax industries. Which basically means that I am running lower springs to keep the overall height down, slightly shorter shocks to suit and custom...
Mine sometimes feels like that from a bit of play in the seat slider
A bit more progress this week with rear torsion system being installed.
Front steering damper has also been fitted.
Not much more for the next couple of weeks again though.
57275
57276
There is a lot of strengthening added on and around the rear towers. We don't think a cross brace is necessary. It would also leave less room to try and sneak the 4" exhaust pipe over the rear diff
It looks worse than it actually is. Because of the difference in radius being less from the pivot point to the shock than the front axle, the suspension will still bottom out on bumpstop first. ...
I made some progress over the last two days.
I shifted the cab across from the old to our new workshop.
53190
The engine and transmission are finally mated together and now sitting in the...
I plan to mount the engine and trans over Christmas break and then drop cab back on. I guess I will find out then how the front guards fit
I hate to be negative but I can't imagine a muslim terrorist coming out with his hands up to be carted off to gaol. It won't end well if they have it their way.
Best to take them out before any harm...
Chassis mods are all done and repainted.
King hydraulic bumpstops and new front springs are in.
King 3" shocks with integrated canisters fitted today
Torsion bar assembly is apparently ready to...