I have very carefully cut a small angled slot in the bottom of the cooling system bleed screw.
I only cut the slot to about half way through the screw so the air would rise up and out.
I made...
I have very carefully cut a small angled slot in the bottom of the cooling system bleed screw.
I only cut the slot to about half way through the screw so the air would rise up and out.
I made...
Below is the link to the above thread.
RB30 Patrol FPCU(Fuel Pump Control Unit) modified replacement
Petrol pump modification/redundancy pump/Aftermarket External Replacement pump(RB30)
This is how I added an external redundant fuel pump for my RB30 Patrol.(For carby model, not EFI)
I did this...
Cool, thanx. I've also noticed few fresh questions posted on this thread by few blokes instead of starting a fresh thread for that.
Yeah, it's definitely a good time to organize this thread into sub...
Yeah just took a bit of getting used to how to drive it. With the 35's, I don't use 5th too often anymore, unless I've got some nice flats, but other than that, she'll sit on 110kph all day. Longer...