So I had a bit of a dumb moment last night/today which could have ended up being costly, but managed to figure it out in time and learnt something new :icon_bonk: :D
So here goes:
I recently...
So I had a bit of a dumb moment last night/today which could have ended up being costly, but managed to figure it out in time and learnt something new :icon_bonk: :D
So here goes:
I recently...
Installed a new box of tunes
http://i1083.photobucket.com/albums/j396/Rocket5555/Build%20Pics%20Patrol/079D77B2-0572-4261-B63C-D08A4C779ED7_zpszegxz065.jpg
Good luck mate.
When I sought advice most mechanics who knew about this issue told me to leave it be. It's a fairly large job to fix.
It's a gear box out job in order to get the sump off, in...
What motor ,year etc need all info for others to see
Next up you'll want to do the small rear door strut,
great mod keeps door open when patrol is on an angle
Blow up the photo, it's Oposite Lock. Looks good.
Very nice. Who's bar is it?
Good work, basically that's all the HPD Maf housing is, BUT has slightly larger where the MAF sits, if I was to do it again I would do exactly as your doing and just hone the original MAF housing...
had a bit of a think and want it to look the part so
Im going to tig weld a fitting into one of the Stainless elbows
I have some AN 10 braided hose to pretty it up with the right terminals
Not today but I got these on Saturday at the Perth Comicon to add to my collection.
57119
57120
6 new boots - Hankook Dynapro MT RT03's 285/75/16.
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=57063&stc=1
Played around with the needle valve ,,,,again
running better than ever, temps at 100kph were as low as 250C on the flat,
Very happy with that
Entry 1
BBQ dinner at Spear Creek, Lower Flinders.
56983
Spent a few hours this afternoon making myself a drawer for under the fridge.
brekkie on the Meerup river with a few of us WA NP fellas and ladies
Entry no 2..
http://www.nissanpatrol.com.au/forums/attachment.php?attachmentid=56868&stc=1
This was for supper one night ,
ENTRY 2
Wind in your needle valve a tad more mate. Your egts are like mine now. Nice and cool.
110kph boost is too low mate. Get it to around 10-12 and your egts will drop more.
Decided to change all brake pads before Easter Southern Flinders trip.
Interestingly, I found that these Bendix aftermarket pads contain less friction material compared to genuine Nissan pads....
1/2 a turn at a time by the sounds of it you are nearlly there, keep at it
you'll turn that frown upside down trust me,,,, he he he
Okay, maybe dumbass me again. When I was pulling things apart I looked at air filter and there was dirt on the top of the foam/rubber ring on the top so not sealing. I looked in side and it was a bit...
The black hose on the needle valve. Is this going into the single port next to the vacuum control solenoid? Looks like it is... Your only getting 5psi now? what happens when you screw the Dawes in...
OOI have you stretched the spring in the Dawes valve, if you have try to un stretch it by twisting it slowly.
Also dis connect the battery for a while to re set the ECU.
When winding out the needle...
What I would do here is, remove the dawes, check the spring again, and make sure the spring is not binding up inside the dawes. Sounds to me it is and its not letting the tension off the spring. When...