Yes we did sorry ripper ( good 2 see your still floating around here ), I have moved everything over 2 this new thread for you GQtdauto
Yes we did sorry ripper ( good 2 see your still floating around here ), I have moved everything over 2 this new thread for you GQtdauto
No worries ripper , will do an intro but I'm a new old member .
When I joined this forum this thread is exactly the kind of thing I was hoping for. Detailed step by step photo filled instructions on DIY jobs. Well done ripper excellent work. I can't praise your...
Fitted some USB power outlets to all passenger doors.
48345
4834348344
A quick update. This did get rid of 90% of the noise, but occasionally it still came back. So I removed the rubber strip completely to clean it all up and stick it down properly and I think this...
yes..exactly what I thought that's why I asked ...so I just elect to drop 10 klm off the speedo reading and sit on that to play it safe...maybe the GPS isn't reading properly...it is a Garmin Nuvi...
The size mentioned above are 32's
As for 16 inch rims no problem.. I run 265's and 285's...
@ CPOCSM you could remove that 45lt tank and maybe fit a 75ltr AUX tank
as the gas tank is where your main tank used to be, give Kevin a bell at Brown Davis
you might be able to fit some hotdog...
Is it the original amiss an row pack.
I got a mates out by rubber mallet and WD40 to not much success, until I decided to belt it in more instead of out and broke the rust seal, then more w WD40...
Guy`s the odd wire is an aux power wire which goes to no2 in the plug Not needed unles your running a brake away system
The Pi is similar just not that common. Arduino stuff is everywhere and all open source code so easy to mod. I used the 16x2 (16 caracters with 2 lines) Ebay or Jaycar for all parts. Still under...
So the gearbox has been in now for a couple of weeks and 500k's or so. It's a completely different vehicle now with smooth changes. Took it for a run up to Lancelin from Perth and back and it didn't...
I was looking at dual battery monitors and after not finding much looked further. Also finding out my Patrol hasn’t got real OBDII so are unable to use the cheap link programs went looking at...
[QUOTE=ripper;223612]Thanks for that list. I've already checked some of those things, but you've given me some more to look at.
Let us know how you get on, I'll try to remember some other things...
Hi Ripper,
There are so many things that cause vibrations, you usally have to do it by process of eliminationif there is nothing glaringly obvious.
Some things I have found to check...
I'm 99.5% sure there is no owners manual for the GQ, even if there was it would probable be a crap scan.
I'll check all my resources again tonight as I haven't checked for a while, but don't like...
Because I am not keen on switching the Lock up in and out under load. The Box and the TC will handle the heavy load when it is "locked" it is just the switching that makes me uncomfortable but used...
As soon as I cleared the town 80 zone I would lock it up and go from there.
Along the flat or shallow downhill was all in OD with the TC locked.
Slight uphill I would drop the OD out and stay...
hi
what we use as work is a short piece of copper pipe bent to 90 degrees with the end almost closed attached to the hose we remove the fan speed resister that bo that goes into the side with a...
Solaris is the brand name, aka Dynamat, they are on Ebay. It's about 3mm thick, heavy duty aluminum foil over a bitumen/asphalt like material which goes down on the metal. I've been using a very...
Hi ripper,
There should only be one wire going from your TCU to the converter solenoid in the transmission. From memory I think its terminal 21 on the TCU, but not 100% sure as GQ models did...
The most common cause of the TC lockup dropping in and out is a worn out TC.
95% a reco TC fixes it (if the box is still in good condition)
tappn it
Top write up old mate!!
Great write up ripper......did you get a refund on the box you bought off ebay????
B = Black
BR = Brown
W = White
OR = Orange
R = Red
P = Pink
G = Green
PU = Purple
L = Blue
GY = Grey