I bought a Supercheap Ridge Ryder 12000lbs winch when they were having one of their 35% off sales. Paid $565 for it.
This thread is about how I made my own winch mount, installed the winch and...
I bought a Supercheap Ridge Ryder 12000lbs winch when they were having one of their 35% off sales. Paid $565 for it.
This thread is about how I made my own winch mount, installed the winch and...
http://captiongenerator.com/17565/Hitler-awaits-redback-rooftop-bagsstill
Just for giggles and shit.thought I'd make something for a bit of fun.
Erica at Lakes Entrance.. my 2nd pic.
http://i184.photobucket.com/albums/x260/jpgpz/IMG_1218_zps47fddf27.jpg
One I took this morning. Nice to see some snow on the mountains
44423
Ironman 4x4 suspension kits are 100% certified road legal, up to 50mm. Dont risk being taken off the road for non-compliant components!
In the recent weeks Ironman 4x4 has received notice of...
No mate on a GU you shouldn't need castor correction until you go to a 3-4" lift.
Always a good idea to upgrade this after the first 100,000km, especially if it's still factory. Whilst it may...
Then you would take the warn
$980 for warn 9000. Supercheap has the ridge ryder 12500 in their catalog at half price atm. Think it was about $480 ish
Tika,
The other thing to consider, is that the Factory Nissan Steel Bar was limited in the size winch which would fit in the hole.
A Warn9000 was the maximum size that would fit back when I was...
I don't know that winch so can't comment on its quality but some things to consider are:
Line speed of big winches is usually very slow, and despite what you will be told line speed does matter....
mine has a 2" efs no other bits and pieces although I would like braided brake lines
You won't need radius arm spacers unless you are looking to run 35s on a 2" lift.
Other than springs and shocks you don't "need" to replace anything else. Though if you did desire, swapping to an...
No requirement for Caster Correction, as most trucks still track fairly well with the 2" lift, but you can choose to do it, to restore the geometry to factory.
No Spacers required,, especially with...
Hey mate if your just after a 2 inch lift springs and shocks should be fine there is no need for the other stuff