Search:

http://www.nissanpatrol.com.au/forums/images/imported/2012/08/62.jpg

Look out ladies!

Finally getting some time to do the things I have been wanting to do...

Thanks to Wild for the suggestion we have now categorised the DIY section. There are loads of great DIY posts that get lost...

As the 1st birthday of forum sponsorship approaches, I'd like to remind members of the advantages of being a forum sponsor..... So...........


Why become a forum sponsor?


You will see no...

Unfortunately there seems to be a few of these types of threads popping up on here. It is disappointing that people feel they can do this and think they can get away with. All the best with the...

Hi all,

After speaking to Cameron(who owns GQ Parts)I would like to introduce a new vendor to the Vendors thread.

The vendor is GQ Parts based in Queensland.

The owner of the company is a...

“An old Cherokee chief was teaching his grandson about life…
‘A fight is going on inside me,’ he said to the boy.
‘It is a terrible fight and it is between two wolves.
One is evil – he is anger,...

Hi fellas
have noticed of late that a lot
of guys asking where to run there
drain line from the provent200
some run the oil back into the sump

i run mine to under the body with a
tap...

I was an automotive painter for over 15 years and from the days when I started my apprenticeship until now I seen a huge change and not for the good. When I started out we where matching just the...

At the end of the year the 5.6 litre will be available in the Patrol over here.

It's confirmed in the link below.
http://www.caradvice.com.au/166585/nissan-altima-to-race-in-v8-supercars-in-2013/...

On the spare of the moment on the weekend, I decided to take the mojomobile out for a spin on goolwa beach here in south australia, we packed a bit of food, the rods, bait and the stuff to keep warm...

Here's my collection of tools....
http://www.nissanpatrol.com.au/forums/images/imported/2012/05/6.gif

Not strange at all. Mine has always done it when it's wet. Body mounts and all bushes were fine.
Discovered it was the bottom of the coils on the spring perch making the noise but only over bumps...

Hey Mate, If you dont have any luck with your rubbers and hub, ive had what you described to a tea, i replaced evry rubber in mine and turned out to be the body mount, mine came on braking, and...

another alternative is to tap a few threads in to the holes and use a 3 bolt type puller.

Ahhh, just found a one of my pics to help our cause.

Cheers!

Hope this info is useful for some of you.

Simplest description I have read on how a diesel VE fuel pump (common to all GQ diesels) works and what part does what.

I'm having cold start idling...

I'd be suggesting that normally the pin should be positive & the housing grounded, so with the multimeter red lead on the pin in the middle of the bulb receptacle and the black lead to the housing...

With your voltmeter, put the positive probe on the single terminal in the bulb socket and the negative probe on the inside of the bulb housing.

With the light turn on does the meter read positive...

LEDs are diodes and they are polarity sensitive. Try turning them around as the negative and positve terminals may be wrong way around.

I'm not sure how those cornering lamps are wired up, but the LEDs are polarity biased

So it's possible the way the light socket is wired up is preventing the LEDs from working.

With standard...

If you have the EGR it will look like the pic below.
Some GQ 2.8s don't have the EGR system.
http://i608.photobucket.com/albums/tt164/ferret/plateinsitu.jpg

Bloody oath mate good job glad it worked out well

hey,

i just rebuilt my RD28t and had it boared out i got a new head with all my old running gear for $1300 with head gasket inc.

my rebuild kit was $2000 with oversized pistons and rings, and...

mechanic mate of mine swore by Monotorque gasket kits - but that was 20 years ago and I have no recent experience.

New head bolts seem to be accepted as necessary. Be tempting to do the rings...