SCA had a fitting on the shelf which had the right size barb for the hose and a big enough thread diameter to go into the hole. Used a 12.5mm drill to clean out the hole and then used silicone grease...
SCA had a fitting on the shelf which had the right size barb for the hose and a big enough thread diameter to go into the hole. Used a 12.5mm drill to clean out the hole and then used silicone grease...
Damn I am getting so clumsy doing my own servicing. Snapped the top fitting off the radiator top tank with the 10l container of new oil as I was pouring it in.
Is this a simple fix as tapping in a...
Just thought I would finish off this post with the outcome. Got a friend who is a panel beater to cut and paint the holes near the airbox and the rear of the panel. I then fitted it myself with a...
Howdy all
Just traded 2 Pajeros on our 4th Nissan so looking forward to towing the caravan around and doing some more trips back up the Cape (lived in Weipa for 8 years).
1985 MQ 3.2TD ute...