Search:

A good fasteners store should
have a thread gauge so you
can get the right die or thread
file.

Can you use a thread file to re-store the thread, they cost around $35 for memory
but a handy bit of kit. even a set of needle files may help in restoring the thread.
Worth a try imo

http://www.nissanpatrol.com.au/forums/images/imported/2015/05/242.jpghttp://www.nissanpatrol.com.au/forums/images/imported/2015/05/243.jpg

Sorry. This is how I got it.

http://www.4x4australia.com.au/drive/1504/bent-utes/

They also have a small nyon ‘restrictor’ to fit inside the tube - part no 10027 - see pic. Not sure if it would cause the issue you have if missing, but does apparently stop the needle from being too...

If it has a brass olive you place on the tubing before the nut ,
then you will need to nip it up so it squashes slightly

I would suggest that it should not be sucking any air. Could be wrong though.

Sent from my iPhone using Forum Runner

Saw this on faceache. Thought I'd share it.

Sorry I have attempted few times to embed just the video but it's a no go. Sorry to those without faceache.

...

Just in case you don't know how to use an anvil.

Took it out to harvey area and Brunswick was a good day out

@ Timbo15 check the "what I did to my Patrol" thread A member
just fitted his light bar to his roof rack, well protected spot too

Stuck a light bar on the roof rack

Gutter mount - I am guessing you mean for a full width bar not 2 small ones either side.
None around that I know of and given the need to support most of the bigger bars in the middle and ease of...

I originally mounted my 240 watt light bar to a single Rhino rack with a bracket I made from some 40x4mm flat.
ATM i made a purpose built roof rack with bar brackets incorperated.
That will change...

Aurora are the best out of the cheaper Chinese bars. If you want a brand then Great whites are really good. I have seen these in action and are good. But having said that, I have a cheap chinese...

For all those grumpy bums out there, you can now disable the Christmas lights :p

Forums Actions -> Edit Profile

Scroll down the bottom and turn off Holiday Visual Effects:

Hey guys thought I would post up how to clean the mud out of my tyre bead as It can be quite common and it's an easy fix instead of costing up to $30 for a tyre shop to do it.

All you need is a...

O.k So I have had a crack in my right barn door since owning the car. For those who don't know, the crack is caused by hanging a larger than stock tyre from the door bracket. The heavy tyre tries to...

Pic 1
Photo By Mrs. Westy
New rope?? I'm a frayed knot...
http://i1272.photobucket.com/albums/y387/BigGQWesty/minimalist_zps547b304b.jpg

Last light shining on the textured sand dune in northern Simpson.

http://www.nissanpatrol.com.au/forums/images/imported/2013/10/4.gif

hey everyone came across this great thread on another forum thought i would share,

http://www.mypatrol4x4.com/topic/57-nads-step-by-step-guide/

also being a relatively new member i would like...

An elderly man in North Carolina had owned a large farm for several years. He had a large pond in the back, fixed up really nice, along with some picnic tables, horseshoe courts, and some apple and...