I have stickers. Did a run of the 750mm ones today. Can do bigger and have done the smaller ones just haven't weeded them.it took 1.5 hours to fully produce. 10.
Any one wants one let me...
I have stickers. Did a run of the 750mm ones today. Can do bigger and have done the smaller ones just haven't weeded them.it took 1.5 hours to fully produce. 10.
Any one wants one let me...
Hiya dudes,
Didn't even notice I'd been gone did ya's :tease:
Long story short, I had been having niggling health issues for a while as most of you know.
The Medicos narrowed it down to most...
...as preface, apart from being mechanic, I'm also an electronics technician, and that said... I only got involved with this repair once I realized the actual problem was purely electronic, not so...
Forgot about this thread.
I ended up getting 265/70x17 Nitto Trail Graplers. After almost 4000ks, very impressed. Not too noisey, can't see any wear after 4000ks. Did 1000 ks up the High Country,...
Hard to say how far off we are from production. Monday we order the first prototype to ensure it all works properly. Then probably a second prototype with any minor refinements and to ensure the...
Absolutely agree with Rumcajs.
The zd30 internally is said to be a strong engine.. Stronger than the td42...
Its major down fall is the stress it's bolt ons are under and a few of the advanced Nads...
https://ecpt.com.au/products-services/ecu-remapping/
or on Facewaste
eastcoastperformancetuning
they're in NSW.
I'm not sure what the cost is but my guess around a grand. What is...
Big congrats to Winnie (aka Colin or Thor) and Amy on their marriage.
Mr and mrs Comber!http://www.nissanpatrol.com.au/forums/images/imported/2017/02/201.jpg
Sent from my iPhone using Tapatalk
There has been an extraordinary amount of rain over the summer months in this part of the world. Many locals and tourists are taking advantage of the conditions and getting out to flowing water and...
Im not having a dig or anything mate. I know you are up for the info so just quoted you. I am on my phone and dont really enjoy writing all this on these tiny screens.
Andrew is doing really well thanks.
We did have a really good christmas and spent some time at a caravan park in Meningie with a big group of family and friends and Andrew and his family joined us,...
Could I suggest some super glue [thick] on the threads and leave to set
The counter question is why are you asking?
Most DIY persons will happily overfill especially in ZD30 scenario because the oil drain times and because Nissan had stuffed up the whole thing.
So...
With the bigger scoop and a tigged IC which is about 30% bigger
will allow your motor to be as about efficient as can be,
And no my motor does not "throw" codes
Paying $1300 plus for the bigger IC...
could be your tps (throttle position sensor)???
pull it out and spray some contact cleaner in there to see if it makes any difference
I have not heard of it being re set with out being disconnected.
So disconnect clean the maf have a drink and re connect, Take it for a test
drive, What boost are you achieving, if known ??
Andrew has been going really good.
It has been 6 months now that he has been out of hospital and he has made amazing progress over that time.
When he was first released he was reliant on oxygen and...
A rare & endangered Female River Crossing Checker (overankles todeepus). Not often seen in daylight & very rarely seen at night. This one seems unaware that it`s natural predator, the infamous...
I thought I would give you an update on my son Andrew and his battle with cancer. After his months of chemo and minor operation in Adelaide he went to Sydney for specialist surgery not available in...
Thanks for the comments. There are the obvious risks of going at this time of year, but the experience makes it worthwhile, as long as you have a Plan B and are prepared to mothball your vehicle...
A couple more...
http://i935.photobucket.com/albums/ad197/BenKDJ/Cape-0018_zpsghkguwof.jpg
http://i935.photobucket.com/albums/ad197/BenKDJ/Cape-0032_zpsog8xxxqu.jpg
A surreal sky greeted us at...
Just got back from a week up the Cape with my eldest daughter testing our friendship with mother nature. It's always a risk at this time of year, but after a good hard look at the weather forecasts...
Just saw this on Faceache and stole it to show here.
Anyone been here before? That would suck being stuck in a hole that deep!
...
OK So one of the big maintenance items that we may attempt at home is a CV swap or Swivel Hub Rebuild. I have done this a Few times and have had these pics ready to go for ever!! I have referenced...
http://www.nissanpatrol.com.au/forums/images/imported/2011/04/1.jpgA nutsert works on the same principal as a pop rivet.
...