Hopefully picking up my '06 GU IV tomorrow. Country car, clean inside and out, best example mechanically I came across anyway. I know Nissan 'corrected' the grenading issues by the GU IV but should I...
Hopefully picking up my '06 GU IV tomorrow. Country car, clean inside and out, best example mechanically I came across anyway. I know Nissan 'corrected' the grenading issues by the GU IV but should I...
That is fine for a stock standard engine.
If it has had a head gasket replacement
which means the head has been planed,
it is difficult to get the timing and mixture
right as the compression...
You don't really need a full ECU replacement. I run an Xede piggyback with my Pacemakers and 2.5" Redback system and I can modify fuel and timing as much as necessary.
The problem with these...
I was about to reply the same thing before I saw your post.
Absolutely right, there's nothing the best dyno tuner in the country can do to tune a TB45E
Get some fresh plugs, get the tappets done,...
id start by making sure evrything is in good nick, airfilter, oil/oil filter, spark plugs, set the tappets(.35mm hot for tb45 if i remember right) have the injectors cleaned, clean the maf,replace...
Hi,
I just read a pretty interesting comparison of snatch straps over at the online Unsealed 4x4 mag.
They carried out a destruction test of some of the most popular brands. Bit of an eye...
When i was down in crib point i heard about daltons!!! and i was only there for 6 months so they must have a good repuration.
Give Rob Braune at Portland a call. He
.
has many years experience, and
has tuned my RB30 to perfection.
0427217173. If you decide to
come down this way let me
Although I haven't used Daltons I have heard very good reports as well from another forum member. Helped him out after he had issues with another mechanics stuff-up.
Welcome mate!
I heard of a place in frankston (yeah dodge place but still) who runs a really good shop ill finish work and get backk to you
welcome to the forum :)
Chris Dalton in Geelong. Came recommended by others on this forum. Did a great job for me at a very reasonable price. Professional & personal service. Will arrange a time for you to accomodate your...
http://www.jpc.com.au/
these guys would be the best in the northern suburb area of Melb
Good idea removing the gas will save heaps of weight and only
one fuel toworry about
G'day and welcome to the forum mate.
Welcome to the forum. I think that if the 4.5 is in good condition you can spend a little to give it a thorough service and keep it. It might be a tad thirsty but if reliable will be cheaper than...
Gday mate welcome aboard
Welcome to the forum mate
Welcome to the forum mate, feel free to ask any questions.
Welcome mate, surely the best forum on the net.
If you need it, you can get it, if you want to know it, just ask it.
If you want to find it, go to the search bar for a universe of information....
Welcome mate. My Dad always said "Come on Bertha" so I know exactly where you are coming from. :)
Hello and welcome to the forum, plenty of info
here for you so jump in anytime and enjoy
Bumper and tow bar removed ready to lift tank in
583385833958337
Think I have it sorted only thing I can't work out is where the evap hoses from both tanks plumb into my sub tank has been looped back to where the main tank is supposed to go
58277
First hiccup neg and pos wire from sender to aftermarket fuel pump are too short time to modify.
58256